(813)750-0388 Book a Repair
Model library · Monogram trash compactor

Monogram ZCGS150L repair

14 7/8-inch stainless built-in compactor. Service for this model across Tampa Bay.

Monogram trash compactor repair in Tampa Bay
Model
ZCGS150L
Type
14 7/8-inch stainless built-in compactor
Brand
Monogram

About the ZCGS150L

Stainless steel and 14 7/8 inches wide, the ZCGS150L is a Monogram compactor that measures 33 3/4 inches tall and 24 deep, with a 1.40 cubic foot bin. It is intended for a 15-inch cabinet opening under the counter.

A unit this size gives us four areas to cover: the drawer, its closed-position switch, the start control and the drive behind the ram. Simplest first, so the drawer and tracks, then onward to the motor. If a cycle starts and then stalls, we load the unit and listen for where the drive loses speed. The label supplies the model and serial before we order anything.

What we check on a ZCGS150L visit

  • Motor and drive strain at 1.40 cubic feet
  • Drawer tracks and the closing switch
  • Start and lock controls

Key features

  • Stainless steel, 14 7/8 inches wide
  • Bin size 1.40 cubic feet
  • Cabinet opening of 15 inches

The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

ZCGS150L questions

Will the ZCGS150L go into a 15-inch cabinet opening?

Its listed width is 14 7/8 inches, so it is made for that opening. We measure the opening first if you are moving or replacing the unit.

The compactor hums but the ram sits still. Why?

Possible causes include wear in the drive, a ram that binds or a motor unable to start under the load. We test each one in turn and tell you which it is.

Call Book a Repair
Call (813)750-0388 Book a Repair