(813)750-0388 Book a Repair
Monogram microwave & advantium error code

Monogram Advantium 120V F1 Error: Cavity Sensor Circuit Open

F1 on a Monogram Advantium 120V speedcook oven means the control sees the cavity temperature sensor circuit as open, so the oven usually will not start a speedcook program.

Needs attention soonChecked November 2026

What does Monogram microwave & advantium code F1 mean?

F1 appears on 120V Monogram Advantium speedcook models, for example the ZSC1001, ZSC1201 and ZSC1202. It points to the thermistor that measures the temperature inside the oven cavity, and the control reads that circuit as open, so the signal is missing or broken. Our description relies on the code list published for this speedcook platform rather than on a Monogram document. Expect F1 on the display and a refusal to run speedcook programs.

F1 at a glance

Code
F1
Appliance
Monogram microwave & advantium
Applies to
Monogram Advantium 120V speedcook ovens
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Cavity thermistor circuit reading open

What you may notice with F1

  • F1 shows on the display as soon as you try to cook.
  • Speedcook programs refuse to start or end shortly after beginning.
  • The oven cavity looks fine, with nothing visibly broken.

How the microwave & advantium detects F1

The cavity thermistor is a small temperature-sensitive resistor in the oven. The control sends a tiny signal through it and reads how much resistance comes back, then turns that number into a cavity temperature. Speedcook programs depend on that number to manage heat.

An open circuit means the signal does not get through at all. The path may be broken in the sensor, at its plug or in the wiring toward the control board, and the control reads that silence as a failed sensor. Without a temperature it cannot cook safely, so it displays F1 and usually refuses to begin a speedcook program.

Likely causes of F1

  • Cavity thermistor circuit reading open
  • Sensor plug that is loose or damaged
  • Wiring broken between the sensor and the control board
  • Control board input that misreads the sensor signal

Can you keep using the microwave & advantium with F1?

Wait until the oven is fully cool, then run a basic microwave function once and check whether the code shows again. If it comes back immediately, stop using the oven for cooking. Without a working temperature reading, the control cannot manage heat, and forcing repeated starts achieves nothing. Keep the door closed and keep children away from the cavity.

What you can safely check

  1. Stop any cooking, keep the door shut and let the oven cool completely.
  2. Wipe spills out of the cavity once it is cold, especially near the back wall.
  3. Press CANCEL or OFF and try a simple microwave function.
  4. If F1 shows again straight away, stop cooking with this oven and call us.

What our technician does for F1

  • Measure the cavity thermistor circuit to separate the sensor from its plug and wiring
  • Confirm the open reading is steady and not an occasional glitch
  • Quote in writing before replacing the sensor or any other part

How to keep F1 from coming back

  • Wipe up spills in the cavity quickly, particularly near the back wall.
  • Keep the oven's vents clear so heat does not build up around its wiring and sensors.

Technical reference

Code
F1
Appliance
Monogram microwave & advantium
Control family
Monogram Advantium 120V speedcook ovens
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

F1 questions

Does F1 mean my Advantium is overheating?

No. F1 describes a sensor circuit that reads open, so the control has lost its temperature reading. That is a measuring problem, although the oven stops cooking to stay safe.

Why does F1 show up the moment I start a program?

The oven needs the cavity temperature reading before it can cook, so the message can appear as soon as you ask it to start. It does not mean the problem began at that moment.

Could a loose plug cause F1?

Yes, an open reading can come from the sensor, its plug or the wiring in between. We measure the circuit to learn which one before suggesting a part.

Is there a related code for a shorted sensor?

Yes. The same thermistor circuit has a separate code for a shorted reading, where the resistance falls too low instead of the path breaking. Both leave the oven without a reliable cavity temperature, which is why the control stops speedcook cooking.

Will F1 clear on its own?

A reset after cooling may clear the display, but an open sensor circuit does not fix itself. If F1 returns, the cause is still in the sensor, its plug, the wiring or the board input.

Need help with F1?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair