(813)750-0388 Book a Repair
Monogram microwave & advantium error code

Monogram Advantium 120V F2: Shorted Cavity Thermistor Reading

F2 on a 120V Monogram Advantium speedcook oven means the control reads its cavity temperature thermistor circuit as shorted, so speedcook operation stops or will not begin.

Needs attention soonChecked November 2026

What does Monogram microwave & advantium code F2 mean?

On 120V Monogram Advantium speedcook ovens, including the ZSC1001, ZSC1201 and ZSC1202, F2 concerns the same cavity thermistor as F1 but with the opposite reading. The control finds that circuit shorted, which means its resistance has fallen to an impossibly low value. This reading is taken from published listings for the same platform, so treat it as a plain description and not a Monogram quote. Speedcook operation stops or refuses to begin.

F2 at a glance

Code
F2
Appliance
Monogram microwave & advantium
Applies to
Monogram Advantium 120V speedcook ovens
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Cavity thermistor circuit reading shorted

What you may notice with F2

  • F2 displays and the oven declines to run a speedcook program.
  • Cooking stops partway through a program that started normally.
  • Residue or moisture is visible around the cavity walls.

How the microwave & advantium detects F2

A thermistor changes its resistance as the temperature changes, and the control converts that resistance into a cavity temperature. It also knows the range of resistance that a working thermistor can possibly show. When the reading drops below that range, the control concludes that the circuit has a short somewhere.

A short can come from the sensor itself, from a wire whose insulation has been pinched or chafed, or from moisture or residue bridging the connection. Whatever the source, the control no longer has a believable temperature. It shows F2 and stops or refuses speedcook operation instead of heating with no feedback.

Likely causes of F2

  • Cavity thermistor circuit reading shorted
  • Sensor wiring that is pinched or chafed
  • Damp or residue at the sensor plug
  • Control circuit that gives the sensor reading wrongly

Can you keep using the microwave & advantium with F2?

One short test after the oven has cooled is reasonable. If F2 appears again, stop using the speedcook features. A shorted sensor reading leaves the control without real temperature feedback, so continuing could mean cooking with the wrong heat. Leave the door closed and the oven idle until a technician has tested the circuit and its wiring.

What you can safely check

  1. Let the oven cool completely with the door closed before you reach inside.
  2. Dry the cavity, taking care around the back wall where moisture or residue can collect.
  3. Press CANCEL or OFF, then try one simple function.
  4. Should F2 appear again, leave the speedcook features unused and call us.

What our technician does for F2

  • Test the sensor circuit end to end to tell a shorted sensor from damaged wiring
  • Check the connection for water or residue that could imitate a short
  • Quote in writing before any part is ordered

How to keep F2 from coming back

  • Wipe moisture and food residue out of the cavity promptly, since damp deposits near a connection can mimic a short.
  • Place dishes away from the back wall so nothing knocks against the sensor wiring.
  • In humid Florida kitchens, leave the door open briefly after steamy cooking so the cavity dries.

Technical reference

Code
F2
Appliance
Monogram microwave & advantium
Control family
Monogram Advantium 120V speedcook ovens
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

F2 questions

What does a shorted thermistor mean?

The thermistor circuit passes current too easily, so its resistance reads impossibly low. The control cannot turn that into a believable cavity temperature.

Can moisture cause F2?

Yes, water or residue at the sensor connection can imitate a short. Let the oven air out with the door open and wipe the cavity dry. If F2 still returns, the circuit needs testing.

Will a new sensor fix it?

Only if the sensor is the shorted part. We test the whole circuit first, including wiring and connectors, because a pinched wire gives the same reading.

Does F2 mean the oven is too hot?

No. It describes the sensor circuit, not the temperature itself. Because the control loses its reading, it stops speedcook cooking instead of guessing, so the cavity is not necessarily hot.

What should I tell the technician about F2?

Say exactly what the display shows, the model such as the ZSC1201, and whether steam or a spill came first. A technician can then separate a shorted circuit from an open one.

Need help with F2?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair