Monogram ZGP Range C4: Link to Auxiliary Relay Board Lost
C4 is a Monogram ZGP gas range code for a lost link between the oven control and the auxiliary relay board. Fans, lights or the lockout that board runs may then stop responding.
What does Monogram professional range code C4 mean?
C4 is reported by a Monogram ZGP professional gas range such as the ZGP486ND when the oven control loses its connection to the auxiliary relay board. This second board looks after loads the main relay board does not, for example certain fans, lights or the lockout. While the link is down, those loads cannot be commanded. The control stores C4, and technicians read the stored list from a test menu that stays open only briefly after power-up.
C4 at a glance
- Code
- C4
- Appliance
- Monogram professional range
- Applies to
- Monogram ZGP professional gas ranges with an auxiliary relay board
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Harness between the oven control and the auxiliary relay board
What you may notice with C4
- C4 appears on the oven display
- An oven light or a fan does not respond as usual
- The oven may ignore a command tied to its lockout
How the professional range detects C4
A Monogram range with two relay boards splits the switching work between them. The main board handles its own set of loads, and the auxiliary board takes the rest, which can include fans, lights or the door lockout depending on the model.
The oven control keeps talking to both boards. When the auxiliary one stops answering, the control stores C4 and loses the ability to command anything that board switches. Which of those loads is affected varies by model, so the check starts with the harness and its plugs, then moves to the board, and confirms what the board actually runs on that range before a repair is proposed. The stored code can be read from a test menu during the visit.
Likely causes of C4
- Harness between the oven control and the auxiliary relay board
- Plug at one end of that harness not seated
- Auxiliary relay board that stops answering
- Control output that sends requests to the auxiliary board
Can you keep using the professional range with C4?
Switch the oven off and avoid using it until the link is restored, because you cannot be sure which loads still obey the control. A fan or lockout that does not respond matters during a cleaning cycle in particular. Cooktop burners are on a different circuit from the oven control, so they may still work, though if gas is ever smelled, get out of the home and phone the gas utility from outside.
What you can safely check
- Keep every oven control off before you inspect anything.
- Notice whether the oven light and the fans work as they normally do.
- Try one plain bake and see whether the code returns.
- If C4 appears again, leave the oven off and contact us.
What our technician does for C4
- Check the harness and plugs at both ends
- Find out which loads the auxiliary board runs on your model
- Test the board before quoting its replacement
How to keep C4 from coming back
- Avoid pulling the range away from the wall yourself, since a strained harness can loosen its plugs.
- After a Florida storm or outage, restore power and note any code so a pattern becomes visible.
Technical reference
- Code
- C4
- Appliance
- Monogram professional range
- Control family
- Monogram ZGP professional gas ranges with an auxiliary relay board
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram professional range error codes
C4 questions
Why do my oven lights or fans act strangely with C4?
Those loads may be switched by the auxiliary relay board. When the control cannot reach it, the loads lose their instructions, so a light or fan can fail to respond.
Does C4 mean the whole oven is dead?
Not necessarily. The main relay board can still work, so some functions may continue. What fails depends on which loads the auxiliary board handles on your model, which we confirm during the check.
Is C4 a sign of a gas leak?
No. C4 is an electronic communication code. If you ever smell gas, though, get out of the house and phone the gas utility from outside.
Is C4 the same as the main relay board code?
No. C1 points to the main relay board and C4 points to the auxiliary board. Both are communication codes, yet each involves its own board and its own loads, so each needs a separate test.
Will C4 disappear by itself?
It can, if a plug reseats for a while, but a connection that has loosened can drop again. If it returns, write down the date and which light, fan or function acted oddly.
Need help with C4?
We trace the cause in your home first and write the price down before any part is swapped.