Monogram ZGP Range F4 Code Explained: Oven Sensor Reads Shorted
F4 on a Monogram ZGP gas range means the control reads the oven sensor as shorted, with resistance under 950 ohms. Expect weak or no heat, or a cycle that quits partway.
What does Monogram professional range code F4 mean?
Monogram's ZGP professional gas ranges, for example the ZGP486ND or the ZGP366N, show F4 when the oven control finds a short in the oven temperature sensor. The control measures the sensor's resistance, and anything under 950 ohms counts as shorted. A good sensor measures around 1080 ohms when the room is at normal temperature, and moves about 2 ohms per degree of change. With F4 stored, the oven may not heat, or it may quit in the middle of a cycle.
F4 at a glance
- Code
- F4
- Appliance
- Monogram professional range
- Applies to
- Monogram ZGP professional gas ranges, oven sensor circuit
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- The oven sensor is shorted internally
What you may notice with F4
- F4 appears on the control display after you start a bake
- The oven does not heat or heats poorly
- A bake stops partway through instead of finishing the cycle
- The code returns after cooling and a restart
How the professional range detects F4
The oven sensor in a ZGP range works like a thermometer whose resistance changes with heat. The control sends a small signal through it and reads the resistance that comes back. A healthy sensor measures about 1080 ohms in a room-temperature oven and moves about 2 ohms for each degree, so the control can turn the number into an oven temperature.
When the resistance falls under 950 ohms, the control decides the sensor is shorted. A true short inside the sensor does this, but so can a lead that is pinched or touching metal, or a connector with a poor contact. Since the control cannot trust the reading, it stores F4 and may refuse to heat or stop in the middle of a cycle rather than guess the temperature.
Likely causes of F4
- The oven sensor is shorted internally
- A sensor lead is pinched or touching metal
- A connector contact is poor at the control
- The control is misreading the sensor input
Can you keep using the professional range with F4?
Better not. If F4 returns after the range has cooled, stop using the oven and have the sensor tested. With a shorted sensor the control cannot read the temperature, so heat may be weak or absent, or a cycle may quit midway. Do not try to work around it. The cooktop burners are separate and may still work, but keep the oven off.
What you can safely check
- Switch the controls off, keep the oven door closed, and let the range cool all the way.
- Run a brief bake on a moderate setting and watch for F4.
- If it appears again, stop using that oven and get in touch with the code and your model number.
What our technician does for F4
- Measure the sensor while the oven is at room temperature and weigh the result against the expected range
- Inspect the lead and connector for pinching or contact with metal
- Move on to the control only once the sensor and wiring pass
- Give a written price first
How to keep F4 from coming back
- Keep the oven door closed while the range cools so the sensor is not stressed by sudden changes.
- Avoid pushing pans against the back wall of the oven where the sensor sits.
- Let us know if a lead looks pinched after any oven cleaning.
Technical reference
- Code
- F4
- Appliance
- Monogram professional range
- Control family
- Monogram ZGP professional gas ranges, oven sensor circuit
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram models that can show F4
Models named for this code in Monogram documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Monogram professional range error codes
F4 questions
What is F4 telling me on a ZGP?
The oven sensor looks shorted from the control's point of view, with resistance under 950 ohms, well below what a good sensor shows in a cool oven.
Why is a cold oven needed for the test?
Resistance changes as the sensor heats, so a fair reading is taken cold. We compare it with what a good sensor should show.
Does F4 mean a new sensor?
Not always. A pinched lead, a lead resting on metal, or a weak connector will give the same reading, so we examine each one before ordering anything for your range.
Is F4 the same as the open sensor code?
No. F4 means the sensor reads shorted, under 950 ohms. The open sensor code comes from a break in the circuit instead. They are opposite problems in the same circuit.
Will F4 clear by itself?
It can vanish after a restart if a contact was only briefly poor. A true short or pinched lead will bring it back, and a repeat means the sensor circuit needs testing.
Need help with F4?
We trace the cause in your home first and write the price down before any part is swapped.
