Monogram ZGP304NRSS repair
30-inch gas range. Service for this model across Tampa Bay.

- Model
- ZGP304NRSS
- Type
- 30-inch gas range
- Brand
- Monogram
About the ZGP304NRSS
Sealed burners and a gas oven sit in the ZGP304NRSS, a Monogram gas range 30 inches wide. Its frame matches other Monogram ranges of this width, so a standard cabinet opening takes it.
A burner that will not light or an oven that runs weak is where these calls begin. The caps come off, sealed burner heads are cleaned and electrodes tested. In the oven, ignition timing is studied, heat compared with the dial and convection run if offered. Flame color reveals much about the gas side, so it gets close attention. Little detail exists on this number, so the rating plate has the final word on model, serial and fuel type.
What we check on a ZGP304NRSS visit
- Lighting of the sealed burners and how the caps seat
- Oven ignition, heat and convection fan sound
- Gas fitting and fuel type
Key features
- Burners sealed against spills
- Oven fired by gas
- Bake modes: standard and convection
- Thirty-inch frame
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram professional range codes
Codes listed for Monogram professional ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram professional range models
Professional RangeZDP304NTSS30-inch dual-fuel range
Professional RangeZDP30L4DSS30-inch free-standing gas range
Professional RangeZDP30N430-inch natural gas range
Statement CollectionZDP364ND36-inch dual-fuel griddle range
Statement CollectionZDP364NR36-inch dual-fuel grill range
Professional RangeZDP366NTSS36-inch six-burner dual-fuel range
Professional RangeZDP36L4D36-inch propane griddle range
Professional RangeZDP36L4R36-inch propane grill rangeZGP304NRSS questions
One burner flame stands away from the ports. Should it?
No. Excess pressure or a dirty burner head can cause it. The burner is cleaned and supply examined, and we report before suggesting a part or adjustment.
How are parts matched to my range?
By the exact model and serial on the plate, not by family. Similar-looking ranges may carry different igniters, valves and heads.