Monogram Induction Cooktop E1: Temperature Sensor Problem
E1 on a Monogram induction cooktop means the board is not receiving a usable reading from the sensor that watches coil or glass temperature. Owners cannot reach that sensor, so this needs testing.
What does Monogram cooktop code E1 mean?
E1 is a temperature sensor problem on a Monogram induction cooktop. The control board relies on a sensor that monitors the temperature of the induction coil or the glass surface, and it is not receiving a valid reading from it. The sensor itself may have failed, the wiring connection to it may have failed, or the input circuit on the control board may have stopped reading correctly. The sensor sits beneath the glass. No particular series is named for this code.
E1 at a glance
- Code
- E1
- Appliance
- Monogram cooktop
- Applies to
- Monogram induction cooktops with a temperature sensor
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Temperature sensor under the glass no longer gives a valid reading
What you may notice with E1
- The display shows E1 when you start a zone.
- One or more zones will not heat, or stop heating suddenly.
- Nothing looks broken, because the sensor sits out of sight under the glass.
How the cooktop detects E1
An induction cooktop heats the pan through a coil under the glass, and the board needs to know how hot that area is getting. A temperature sensor beneath the surface reports the coil or glass temperature, and the board compares the reading with what it expects while a zone is running.
E1 appears when the reading is not valid. That can mean the sensor no longer responds, that the wire joining it to the board has lost contact, or that the board's own input circuit cannot read the signal any more. In each case the board has no trustworthy picture of heat under the glass. It does not guess, so the safe move is to show the message and withhold heat until the reading returns.
Likely causes of E1
- Temperature sensor under the glass no longer gives a valid reading
- Wiring connection between the sensor and the board has broken down
- Input circuit on the control board that reads the sensor has stopped working
Can you keep using the cooktop with E1?
Do not keep cooking on the cooktop while E1 shows. The board cannot read temperature at the coil or glass, and heating without that reading is not something to rely on. Leave the zones off and the pans away. The glass can be wiped with a cloth once it is cool. A technician has to test the sensor from underneath, which means removing the cooktop from its cutout.
What you can safely check
- Turn all zones off, let the glass cool fully, and switch the cooktop off at the breaker if E1 stays on the display.
- Check that the glass is clean and dry and that no pan or object is resting on the controls.
- Switch power back on and see whether E1 appears again with all zones empty.
- Do not try to lift or loosen the cooktop from the countertop.
- If E1 returns, leave the cooktop off and have it tested, because the sensor lies beneath the glass.
What our technician does for E1
- Test the temperature sensor and its resistance at the board
- Inspect the sensor wiring connection for a break or poor contact
- Check the board input circuit and replace the sensor or board that tests bad
How to keep E1 from coming back
- Do not drop heavy pots on the glass, since impacts and strong vibration can disturb parts under the surface.
- Wipe spills quickly so liquid cannot run into edges and seams where it could reach internal wiring.
- In humid kitchens, wipe the glass dry after cleaning so moisture does not settle at the edges.
Technical reference
- Code
- E1
- Appliance
- Monogram cooktop
- Control family
- Monogram induction cooktops with a temperature sensor
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram cooktop error codes
E1 questions
Where is the E1 sensor located?
It sits below the glass, near the induction coil or the glass surface it monitors. Reaching it means lifting the cooktop out of its countertop cutout, so owners cannot get at it.
Can E1 make the cooktop heat too much?
Without a valid temperature reading the board cannot monitor heat at the coil or glass, so avoid using the cooktop until it is tested. Do not try to work around the message.
Does a new sensor always fix E1?
Not always. The sensor, its wiring connection and the board input circuit are all named as causes, so each needs testing before we replace anything.
Is E1 an overheating warning?
No. E1 says the temperature reading is not valid, not that the cooktop is too hot. The glass may be cool while E1 shows, and the cause still needs testing.
What happens if I ignore E1?
The affected zones can remain unusable, and running them without a valid temperature reading is not sensible. The cause stays in place until the sensor, wiring or board is tested, so leave the cooktop off.
Need help with E1?
We trace the cause in your home first and write the price down before any part is swapped.