Monogram ZHU Cooktop Code E alternating with c: Key Stuck On
E alternating with c on a Monogram ZHU induction cooktop means the keypad senses a key that is held down all the time. The control then ignores touches until the keys read normally.
What does Monogram cooktop code E alternating with c mean?
The display of a Monogram ZHU30 or ZHU36 induction cooktop, among them the ZHU30RSRSS, ZHU36RSRSS, ZHU30RBMBB and ZHU36RBMBB, can switch back and forth between E and c. That pattern tells you the keypad is picking up continuous activation of one or more keys. Since a key looks permanently pressed, the control disregards every touch and may refuse to start any element. The older owner's manual is the source of this description.
E alternating with c at a glance
- Code
- E alternating with c
- Appliance
- Monogram cooktop
- Applies to
- Monogram ZHU30 and ZHU36 induction cooktops
- Type
- Low urgency
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Spilled liquid, water or sticky residue sitting on the control keys
What you may notice with E alternating with c
- The display alternates between E and c
- Touching the keys produces no response at all
- None of the elements will start
- Water or a cloth is sitting near the controls
How the cooktop detects E alternating with c
The controls on a ZHU cooktop are touch keys under the glass. The control watches each key for a touch that begins and then ends. A real press is short. A key that seems to stay pressed makes no sense to the control, because it could mean a cloth is lying on the pad or a sensor is stuck.
When the keypad reports continuous activation, the control shows E and c alternately and stops taking commands. This protects against an element starting by accident. It also means the cooktop may refuse to start any element until the key signal returns to normal. The older owner's manual describes the display in these terms, and moisture or an object on the glass is the simplest reason.
Likely causes of E alternating with c
- Spilled liquid, water or sticky residue sitting on the control keys
- A pan, cloth or utensil resting on the key area
- A touch sensor that reports a key as pressed when nobody touches it
- The control board input that receives the key signals
Can you keep using the cooktop with E alternating with c?
Can you keep using the cooktop with E and c showing? The cooktop will not start an element while the code is on, so there is nothing to use. Turn everything off, clear and dry the control area, and try again after a minute. If the code stays, leave the cooktop off and have it tested rather than pressing the keys repeatedly.
What you can safely check
- Turn each element to off and wait for the glass to cool before you touch the surface.
- Take anything off the control area, such as pans, cloths or utensils.
- Dry the glass around the keys with a soft cloth.
- Give it a minute, then touch the keys again, and keep sharp tools away from the glass.
- If E and c keep trading places on the display, let us know.
What our technician does for E alternating with c
- Test the touch panel and its wiring
- Check whether a sensor stays active after the glass is clean and dry
- Look at the control board input for the keys
- Test an element once the keypad reads normally
How to keep E alternating with c from coming back
- Wipe up spills near the keys right away and dry the glass after cleaning.
- Keep pans, cloths and utensils off the control area while cooking.
- Use only soft cloths on the glass, never sharp tools.
Technical reference
- Code
- E alternating with c
- Appliance
- Monogram cooktop
- Control family
- Monogram ZHU30 and ZHU36 induction cooktops
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram models that can show E alternating with c
Models named for this code in Monogram documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Monogram cooktop error codes
E alternating with c questions
What are E and c telling me together?
The cooktop is reporting a key that seems to be pressed constantly. It is not a heating problem, and your cookware is fine.
Could a damp dishcloth be the cause?
Yes. A soaked cloth lying over the key area can set the keys off. Lift it away, dry the glass, and watch whether the display clears.
Might it go away without help?
It can, once whatever sat on the glass is removed or dried. If the display lingers on clean, dry glass, the touch controls themselves need a look.
Is E and c a heating problem?
No. The display points to the keypad, not to the elements or the pan. The elements themselves can be fine, but the control will not start them while it thinks a key is held down.
Is this different from the E that flashes alone?
Yes. A flashing E with nothing alongside it is a general hardware message. When the c appears next to it, the older owner's manual ties the display to the keys.
Need help with E alternating with c?
We trace the cause in your home first and write the price down before any part is swapped.
