(813)750-0388 Book a Repair
Monogram cooktop error code

Monogram ZHU Cooktop Control Lockout Indicator Lit: How to Unlock

A lit Control Lock indicator on a Monogram ZHU induction cooktop means Cooktop Lockout is on. Holding the Control Lock pad for three seconds turns the lockout off.

Normal status, not a failureChecked November 2026

What does Monogram cooktop code Control Lockout Indicator mean?

Owners of the Monogram ZHU30 and ZHU36 induction cooktops, in 30-inch and 36-inch widths including the ZHU30RSPSS and the ZHU36RSPSS, may find the Control Lock indicator glowing. It means Cooktop Lockout is switched on, so touches on the controls do nothing. A three-second touch on the Control Lock pad turns it on, and the same three seconds turns it off. Auto Lock, set under Custom Settings, can explain a lock that appears after use.

Control Lockout Indicator at a glance

Code
Control Lockout Indicator
Appliance
Monogram cooktop
Applies to
Monogram ZHU30 and ZHU36 induction cooktops
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
The lockout turned on manually

What you may notice with Control Lockout Indicator

  • The Control Lock indicator is lit on the display
  • Touching an element pad does nothing
  • The cooktop was working before it was cleaned
  • Holding the lock pad for three seconds clears the light

How the cooktop detects Control Lockout Indicator

An induction cooktop has no knobs, so its touch controls can react to anything resting on the glass. Cooktop Lockout exists to prevent that. When it is on, the control keeps its indicator lit and ignores touches on the pads, so a wipe or a stray hand does not start an element.

The lock is turned on and off with the Control Lock pad, held for three seconds. A short tap is ignored on purpose. Auto Lock, found in Custom Settings, can switch the lock on after use without you pressing anything. That is why some owners find the cooktop locked the next time they cook, though nothing is wrong.

Why Control Lockout Indicator appears

  • The lockout turned on manually
  • Auto Lock switched on under Custom Settings
  • The pad held for three seconds by a cloth or during cleaning

Can you keep using the cooktop with Control Lockout Indicator?

Can you keep using the cooktop with the Control Lock lit? Yes, once you unlock it. The lock is a normal safety feature and not a problem with the cooktop. Hold the pad for three seconds, confirm the indicator goes out, and cook as usual. If it will not unlock, keep the elements off and have the panel tested.

What you can safely check

  1. Confirm every element is off and the glass is cool.
  2. Press the Control Lock pad and keep your finger there for 3 seconds.
  3. Watch for the indicator to go dark.
  4. Try an element.
  5. If the light stays on or the pad does not react, tell us.

What our technician does for Control Lockout Indicator

  • Confirm the Auto Lock setting before looking at hardware
  • Test the Control Lock pad and the touch panel
  • Check the glass surface and its connections if the unlock step fails
  • Tell a stuck pad from a failing panel by testing

How to keep Control Lockout Indicator from coming back

  • Check Custom Settings if the lock comes on again by itself.
  • Keep cloths and pans off the control area when you wipe the glass.
  • Dry the glass around the pads, since a damp patch can confuse touches.

Technical reference

Code
Control Lockout Indicator
Appliance
Monogram cooktop
Control family
Monogram ZHU30 and ZHU36 induction cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

Control Lockout Indicator questions

Why do the controls pay no attention to my touch?

They are locked. The indicator glows while Cooktop Lockout is active, and a three-second hold on the pad switches it off.

Is it possible for the cooktop to lock on its own?

Yes, when Auto Lock is enabled in Custom Settings. Some households like it for wiping the glass or keeping children away, and you can disable it there.

What should I do if holding the pad does nothing?

Dry the glass and take pans and cloths off the controls, then try again. If it still ignores you, the touch panel gets tested.

Is a locked cooktop the same as a broken one?

No. A locked cooktop still shows the Control Lock indicator, and the lock lifts with a three-second touch. A broken panel stays unresponsive even after you try that, and then it needs a technician.

Does it hurt the cooktop to leave the lock on?

No. Leaving it on is harmless, and it just keeps the controls from reacting to touches. You will need to unlock it before you can cook.

Something else going on with your cooktop?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair