(813)750-0388 Book a Repair
Monogram cooktop error code

Monogram ZHU Cooktop Er22: Touch Board Check Failed Behind Keys

Er22 is stored for service mode on Monogram ZHU30 and ZHU36 induction cooktops as the third of three touch board codes, while owners see only an E and keys that may stop answering.

Needs attention soonChecked November 2026

What does Monogram cooktop code Er22 mean?

On Monogram ZHU30 and ZHU36 induction cooktops, Er22 joins two neighboring codes as a reading for the touch board, the electronics behind the glass keys. Only a technician can read it, using the cooktop's service mode. Owners see a lone E, or an E that swaps with a letter. Keys can go silent, and a zone may fail to light. When testing confirms the diagnosis, the touch board is the part that is replaced.

Er22 at a glance

Code
Er22
Appliance
Monogram cooktop
Applies to
Monogram ZHU30 and ZHU36 induction cooktops
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Touch board electronics failing one of their own checks

What you may notice with Er22

  • Keys stop answering even though the glass looks clean.
  • A zone will not start when you place a pan and press.
  • The display shows an E, sometimes alternating with a letter.
  • A damp or sticky film sits around the key area.

How the cooktop detects Er22

The touch board does two jobs: it reads your fingertips through the glass, and it keeps an eye on its own circuits. Each internal check has a number of its own, which is why the same board can report several different numbers. Er22 is the number stored when this particular check does not pass.

The cooktop cannot tell the difference between a failing board and a keypanel that is wet or coated with residue, because both change what the keys send. That is why the first step is always to rule out moisture and dirt. If the E stays after the panel is dry and power has been reset, the board or its connector becomes the next suspect.

Likely causes of Er22

  • Touch board electronics failing one of their own checks
  • Connector that is not seating firmly at the touch board
  • Moisture or sticky residue around the keypanel

Can you keep using the cooktop with Er22?

Do not rely on the cooktop while Er22 is stored and the keys are acting up. A keypad that responds unpredictably may switch on a zone you never selected, which matters most when a pan, a towel or a hand is nearby. Turn everything off, use the breaker to cut power, and cook on another appliance until a technician has tested the board.

What you can safely check

  1. Check that every element is off and give the glass time to cool.
  2. Clean around the keys with a soft, dry cloth.
  3. Cut power at the breaker, wait a minute, then restore it.
  4. Place a flat, dry pan on one zone and press its key once.
  5. If the E comes back or the keys misbehave, stop testing and call us.

What our technician does for Er22

  • Read the stored code in service mode, since the owner display never shows Er22 itself
  • Separate a damp or dirty keypanel from a real board problem before replacing anything
  • Replace the touch board once the diagnosis is confirmed and you have approved a written quote

How to keep Er22 from coming back

  • Wipe up boil-overs promptly so sugary or greasy film never settles around the keys.
  • Keep damp cloths and spray bottles away from the keypanel, and dry the glass edge after cleaning.
  • Florida humidity can leave a thin film of moisture on cool glass, so wipe the panel dry after steamy cooking.

Technical reference

Code
Er22
Appliance
Monogram cooktop
Control family
Monogram ZHU30 and ZHU36 induction cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

Er22 questions

What separates Er22 from the other touch board codes?

The board runs several internal checks, and each one reports its own number. A technician reads which one is stored, which gives a better picture of what the cooktop has been doing.

Can damp or sticky keys trigger Er22?

Moisture and residue around the keypanel can confuse the keys, so we rule them out before replacing anything. Dry the glass with a soft cloth and reset power at the breaker to see whether the E returns.

Why does the cooktop show only an E?

The owner display is not built to show the full code. It gives a short E, and the stored number waits in service mode until a technician reads it.

Will Er22 go away if I leave the cooktop alone?

It might clear once after a reset, but a board problem tends to return with use. If the E comes back after you have dried the panel and reset the breaker, the touch board or its connector needs testing.

Is Er22 covered by the Monogram warranty?

That depends on your purchase date and terms, so check your warranty terms or ask us. Repair by an independent company does not by itself end a warranty. Have the model number and purchase date at hand.

Need help with Er22?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair