(813)750-0388 Book a Repair
Monogram cooktop error code

Monogram ZHU Induction Cooktop E5: Filter Board Problem

E5 tells a technician that the filter board, which conditions the power entering a Monogram ZHU induction cooktop, has an electronic problem inside it. Owners see only an E on the display.

Stop using it until checkedChecked November 2026

What does Monogram cooktop code E5 mean?

The filter board of a Monogram ZHU30 or ZHU36 induction cooktop conditions the power that comes in. E5 says something is wrong with the electronics on that board. Only a technician can read E5, in the cooktop's service mode. On the display you get only a short E, sometimes with a letter beside it, and heating may stop. The manual tells the technician to measure the home's supply first and make sure it exceeds 208 volts, then judge the board.

E5 at a glance

Code
E5
Appliance
Monogram cooktop
Applies to
Monogram ZHU30 and ZHU36 induction cooktops
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
Incoming supply voltage to the cooktop

What you may notice with E5

  • A single E, sometimes with a letter beside it, appears on the display
  • The elements stop heating or will not start
  • Other appliances on the same supply seem normal
  • Cycling the breaker may not change anything

How the cooktop detects E5

The filter board on a ZHU induction cooktop sits where the household power enters. It smooths and conditions that incoming supply before it reaches the boards that drive the coils. The control checks the filter board while the cooktop is on and records a code if something about it looks wrong.

E5 is that code. It is kept for the service mode and is not spelled out for the owner, who sees a single E, now and then with a letter beside it. The manual has the technician measure the home's supply first, since anything not above 208 volts can mimic a failing board. Heating may stop while the code is active.

Likely causes of E5

  • Incoming supply voltage to the cooktop
  • The electronics on the filter board
  • Wiring and connectors at the filter board

Can you keep using the cooktop with E5?

Can you keep using the cooktop with this code? Do not keep running it. An electronic problem on the board that handles the incoming power is not something to push through. Turn the elements off, let the glass cool, and switch the breaker off if the E stays on. Have the supply and the board tested.

What you can safely check

  1. Turn all the elements to off, then wait for the glass to cool.
  2. At the breaker, switch the cooktop off for a minute and then back on.
  3. Check whether other appliances sharing that supply seem normal.
  4. Look under the cooktop for stored items crowding the vent space.
  5. Leave the cooktop closed up, and tell us if the E comes back.

What our technician does for E5

  • Read E5 in the service mode
  • Measure the supply voltage at the cooktop and confirm it is above 208 volts
  • Test the filter board and its connectors
  • Replace the filter board only after the supply is ruled out

How to keep E5 from coming back

  • Keep the ventilation space under the cooktop clear of stored items.
  • Ask an electrician about the supply if storms in Florida regularly cause dips in power.
  • Switch the cooktop off at the breaker during a long absence in storm season.

Technical reference

Code
E5
Appliance
Monogram cooktop
Control family
Monogram ZHU30 and ZHU36 induction cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

E5 questions

Why can I not see E5 on the screen?

Only the service mode spells out E5. On the display an owner gets just an E, sometimes followed by a letter, and the stored code gets read when the technician arrives.

Could the power in my home be the cause?

Yes. Low supply voltage is one of the first things checked, because induction needs a steady supply. It is measured at the cooktop before any board is blamed.

Is it all right to keep cooking?

Once the elements quit or the E will not go away, stop cooking on it. Keep the breaker off until the cooktop has been tested.

Could a weak supply look like a bad board?

Yes, which is why the manual has the technician confirm the supply is above 208 volts first. A low or unsteady supply can mimic a failing board, so replacing one before measuring would be a guess.

What happens if I ignore it?

A weak or unsteady supply, or a failing filter board, can put stress on the boards behind it. Leaving the cooktop off until it is tested protects parts that are still good.

Need help with E5?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair