(813)750-0388 Book a Repair
Monogram cooktop error code

Monogram Cooktop E4: Supply Voltage Outside the Safe Range

E4 on a Monogram cooktop means the control board sees incoming voltage outside the range it is built to run on safely. The cause is either the home circuit or the cooktop's own power supply.

Needs attention soonChecked November 2026

What does Monogram cooktop code E4 mean?

E4 tells you the electrical supply reaching the Monogram cooktop is not within the range its control board expects for safe operation. Two broad explanations exist. The home circuit feeding the cooktop may be delivering voltage outside the normal range, or the power supply circuit inside the cooktop may have failed. No series or model is named for this message. There is no owner step that can tell the two apart, because that takes a meter reading taken both in the breaker panel and where power enters the cooktop.

E4 at a glance

Code
E4
Appliance
Monogram cooktop
Applies to
Monogram cooktops with an electronic control board
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Voltage from the home circuit running outside the normal range

What you may notice with E4

  • The display shows E4 and the cooking zones will not heat.
  • Lights or other appliances on the same circuit may flicker or dim.
  • The cooktop may shut down or refuse to start after a power event.

How the cooktop detects E4

The cooktop control board watches the electricity entering the unit as well as running the cooking zones. It expects the incoming voltage to stay within a working range, because heating elements and electronics are designed around that range. When the reading drifts above or below it, the board stops treating the supply as safe and shows E4.

That reading can be true or false. If the home circuit really is delivering the wrong voltage, the cooktop is reporting a problem that sits upstream of it. If the voltage is normal but the cooktop's internal power circuit has failed, the board is being fed a bad value or a bad supply. The message cannot say which, so each end of the connection is measured to separate them.

Likely causes of E4

  • Voltage from the home circuit running outside the normal range
  • Internal power supply circuit of the cooktop has failed

Can you keep using the cooktop with E4?

Do not keep cooking with the cooktop while E4 is showing. Voltage outside the safe range can stress the electronics, and the cooktop has already decided the supply is not suitable. Leave it off, and switch its breaker off if you notice a hot smell, buzzing or scorch marks. Other items in the kitchen can stay in use unless they also act oddly.

What you can safely check

  1. Turn off all cooking zones, and if anything smells hot or shows damage, switch the cooktop's breaker off.
  2. Check whether lights or other appliances on the same circuit are dimming, flickering or acting oddly.
  3. Look at the breaker to see whether it tripped or sits half-way, and do not keep resetting it.
  4. Do not open the cooktop or touch its wiring.
  5. If E4 returns, or other things in the home behave strangely, leave the cooktop off and have the supply and the cooktop tested.

What our technician does for E4

  • Measure voltage inside the breaker panel and again where power enters the cooktop
  • Separate a home wiring problem from a cooktop power circuit problem
  • Replace the cooktop's power supply circuit when it tests as failed
  • Advise on an electrician visit if the home circuit is the source

How to keep E4 from coming back

  • Keep the cooktop on its own correctly rated circuit and avoid sharing it with heavy loads through extension cords.
  • Ask an electrician about whole-home surge protection, since Florida summer storms bring power surges and brief outages.
  • Have flickering lights or warm breaker connections looked at by an electrician instead of ignoring them.

Technical reference

Code
E4
Appliance
Monogram cooktop
Control family
Monogram cooktops with an electronic control board
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

E4 questions

Does E4 mean my home wiring is bad?

Not necessarily. E4 only says the voltage reaching the control is outside its range. The cause may be the home circuit or the cooktop's own power circuit, and a meter reading at both ends tells them apart.

Can a power surge or storm cause E4?

Unstable utility power could push voltage out of range for a time, and Tampa Bay storm season brings such events. If E4 stays after power is steady, the cooktop's power circuit needs testing.

Should I keep resetting the breaker to clear E4?

No. Repeated resets do not fix a voltage problem and can add stress to the wiring. Reset a tripped breaker once at most, then leave the cooktop off if E4 returns.

Is E4 the same as a tripped breaker?

No. A tripped breaker removes power completely, while E4 appears when power is present but the voltage reading is outside the range the control expects. Check the breaker first, then leave the cooktop off.

Who fixes it if the problem is in my home wiring?

If testing shows normal voltage is not reaching the cooktop, the repair is an electrical job for a licensed electrician. We measure at the panel and the cooktop connection so you know which side needs the work.

Need help with E4?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair