Monogram ZHU Cooktop Er39: Touch Board Electronics Problem
On Monogram ZHU30 and ZHU36 induction cooktops, Er39 points to a failing check inside the touch board electronics behind the glass keys, and only a technician can read the code.
What does Monogram cooktop code Er39 mean?
Er39 is a stored touch board code for Monogram ZHU30 and ZHU36 induction cooktops. The touch board sits under the glass and reads your fingertips on the keys. When its electronics report an internal problem, a technician sees Er39 in service mode, but you will not. At the cooktop you may notice only a single E, or an E that swaps places with a letter, plus keys that misbehave or stay silent. Once testing confirms the diagnosis, the touch board is the part that gets replaced.
Er39 at a glance
- Code
- Er39
- Appliance
- Monogram cooktop
- Applies to
- Monogram ZHU30 and ZHU36 induction cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Touch board electronics reporting an internal check failure
What you may notice with Er39
- Keys on the glass ignore touches or respond late.
- The display flashes a single E, sometimes trading places with a letter.
- A zone refuses to start even though a pan sits on it.
How the cooktop detects Er39
An induction cooktop has no knobs, so every command travels through the touch board under the glass. That board senses a fingertip, turns it into a request and hands the request to the power electronics that drive each zone. The board also runs checks on itself. If one of those internal checks fails, the cooktop stores Er39, and only a technician in service mode can read it.
What you notice depends on how the board is failing. Some cooktops show a lone E, or an E that trades places with a letter. Keys may ignore touches, answer late or react to a press you never made. Because the board sits between your hand and the heating zones, key signals you cannot trust are a good reason to stop using the cooktop.
Likely causes of Er39
- Touch board electronics reporting an internal check failure
- Connector or cable between the keypanel and the touch board
- Moisture that has crept under the keypanel glass
Can you keep using the cooktop with Er39?
Stop using it until a technician has looked at the touch board. A cooktop whose keys act on their own can start a zone you did not choose, and a zone that will not turn off is a burn risk. Switch every element off, let the glass cool, and keep pots and cloths off the surface. Cook on another appliance in the meantime.
What you can safely check
- Switch off all the elements and wait for the glass to cool before you touch anything.
- Wipe the keypanel with a dry soft cloth, keeping liquid away from it.
- Switch the cooktop off at its breaker for about a minute, then restore power.
- Press one key to see whether the cooktop responds.
- If the E returns or the keys misbehave again, stop using the cooktop and call us.
What our technician does for Er39
- Read the stored code in service mode to confirm which touch board code is stored
- Check the connector and cable to the touch board and look for moisture under the glass
- Replace the touch board once testing confirms the diagnosis, after you approve a written price
How to keep Er39 from coming back
- Wipe spills off the glass right away and keep liquid from running into the key area.
- Dry the keypanel with a soft cloth after cleaning, because moisture under the glass can confuse the touch board.
- Florida storms can send surges through house wiring, so a whole-home surge protector helps shield the cooktop's electronics.
Technical reference
- Code
- Er39
- Appliance
- Monogram cooktop
- Control family
- Monogram ZHU30 and ZHU36 induction cooktops
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram cooktop error codes
Er39 questions
Why can I not see Er39 on my own display?
The cooktop shows owners only an E, or an E with a letter, while the full code stays in memory for service mode. A technician reads the stored number to learn which board check failed.
Would a new glass top cure Er39?
No. The glass is only the surface, and the code points to the electronics beneath it. A new top changes nothing unless the glass itself is cracked, which is a separate problem.
Can spilled water set off Er39?
Moisture under the keypanel glass is one of the causes we rule out. Switch the cooktop off at the breaker, let the panel dry, and watch whether the E returns. A return points toward the board or its connector.
Will Er39 clear by itself?
A brief power event can store a code that never returns after a reset at the breaker. If the E keeps coming back, the cause is probably still present, and waiting only leaves you with keys you cannot trust.
What should I tell the technician about Er39?
Describe exactly what the display shows, which keys misbehave, and whether it began after a storm or a flicker. Share your model, the ZHU30 or ZHU36, so the right touch board can be matched.
Need help with Er39?
We trace the cause in your home first and write the price down before any part is swapped.