(813)750-0388 Book a Repair
Monogram cooktop error code

Monogram ZHU36 Induction Cooktop Er31: Filter Boards Not Paired

Er31 is a service-mode code for the 36-inch Monogram ZHU36 induction cooktop. It says the two filter boards inside were never set up to cooperate, and a technician has to pair them.

Needs attention soonChecked November 2026

What does Monogram cooktop code Er31 mean?

The 36-inch Monogram ZHU36 induction cooktop carries two filter boards, and Er31 appears only in its service mode. The code says one filter board has not been paired with the other. What reaches the owner is only an E, now and then with a letter, and some zones can stay dark. It tends to follow a board replacement or reset, and the pairing is restored by a technician with a key sequence.

Er31 at a glance

Code
Er31
Appliance
Monogram cooktop
Applies to
Monogram ZHU36 induction cooktops with two filter boards
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Filter board pairing lost after a board replacement

What you may notice with Er31

  • An E appears on the display, sometimes with a letter beside it
  • Some of the cooking zones stay dark
  • The problem began after a board was replaced
  • Only the 36-inch cooktop is affected

How the cooktop detects Er31

The 36-inch ZHU36 induction cooktop has two filter boards where a ZHU30 has one. Each board conditions part of the incoming power, and the two have to be set up so they know about each other and share the work. That setup is stored in the boards.

Er31 is what the control records when one of the two boards was never set up to cooperate with its partner. The code appears only in the service mode, so owners see an E, sometimes with a letter, while some zones may stay dark. It generally follows a board replacement or reset, and a technician restores the pairing with a particular key sequence.

Likely causes of Er31

  • Filter board pairing lost after a board replacement
  • The second filter board missing its setup
  • The connection between the two filter boards

Can you keep using the cooktop with Er31?

Can you keep using the cooktop with Er31? Zones that work can be used with care, but a cooktop that shows an E and leaves zones dark should not be pushed. At the breaker, cut power for a minute and restore it once. If the zones stay dark or the E returns, leave the cooktop off until it has been paired.

What you can safely check

  1. Set every element to off and let the glass cool before anything else.
  2. At the breaker, cut power to the cooktop for a minute and switch it back on.
  3. Make a note of the dark zones, and of any recent board replacement.
  4. Skip key combinations you found on the internet.
  5. Leave the pairing to a technician.

What our technician does for Er31

  • Confirm both filter boards are the correct matching type
  • Pair the two boards through the key sequence
  • Watch for confirmation from the cooktop after pairing
  • Test the boards and their cable if the pairing does not hold

How to keep Er31 from coming back

  • Make sure any board replacement includes pairing the two filter boards.
  • Make sure airflow beneath the cooktop is never cut off by stored items.
  • Avoid pressing hidden key sequences that you found on the internet.

Technical reference

Code
Er31
Appliance
Monogram cooktop
Control family
Monogram ZHU36 induction cooktops with two filter boards
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

Er31 questions

Does the 30-inch ZHU30 ever show Er31?

No. With only one board in the 30-inch size, no pairing step ever arises. Er31 is a ZHU36 matter and only a technician sees it.

Why might two boards need pairing?

Both boards must know about each other. After a part swap or when a stored setting is lost, one board may end up without its setup, so the pairing is run and the cooktop's confirmation is watched.

May I pair them on my own?

That is not recommended. The procedure uses hidden key presses, and one wrong step can leave the control confused.

Is Er31 a sign that a board has failed?

Not by itself. The code says the two boards are not set up to work together, which can happen after a replacement or reset. The pairing is done first, then the cooktop is watched to see whether it holds.

Which details help with Er31?

Say that it is the 36-inch ZHU36, name the zones that stay dark, and mention any recent board replacement. Those facts tell a technician what to bring for the pairing.

Need help with Er31?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair