Monogram ZHU Cooktop Er20: Unresponsive Keys and Touch Board
Er20 is a touch board code stored in service mode on Monogram ZHU30 and ZHU36 induction cooktops, and at the glass it usually appears as a lone E with keys that will not respond.
What does Monogram cooktop code Er20 mean?
Er20 is one of three touch board codes a technician can read in the service mode of Monogram ZHU30 and ZHU36 induction cooktops. It records an internal electronic problem on the board that sits behind the glass keys. Owners are not shown the number. The usual sign is a single E, sometimes swapping with a letter, together with keys that do nothing or a zone that will not start. Er20 sits beside two neighboring touch board codes and is handled in the same way.
Er20 at a glance
- Code
- Er20
- Appliance
- Monogram cooktop
- Applies to
- Monogram ZHU30 and ZHU36 induction cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Touch board electronics storing an internal error
What you may notice with Er20
- A zone will not start even with a flat pan sitting on it.
- Touch keys feel dead, or respond only after repeated presses.
- The display shows a plain E instead of a readable code.
- The E turned up just after a storm or a flicker of the lights.
How the cooktop detects Er20
Every press on the glass is read by the touch board and passed along as a request to the rest of the cooktop. Inside that board are circuits that watch their own health and the power feeding them. Er20 is stored when the electronics report a problem of this kind, and the number is kept for a technician to read in the service mode.
That is why what you can see is so vague. The panel may show a bare E, keys may stop responding, or a zone may decline to start. A momentary power dip can also leave a code behind, which is why the recent history matters, for example a storm or a flicker of the lights just before the E appeared.
Likely causes of Er20
- Touch board electronics storing an internal error
- Ribbon cable or plug connections feeding the touch board
- Control power that does not reach the board steadily
Can you keep using the cooktop with Er20?
Treat the cooktop as out of service until the touch board is checked. If it still heats, keys that lag or fail can make it hard to turn a zone off in a hurry. Use the breaker as your off switch, keep the glass clear of pans and cloths, and do not repeat power cycles over and over in the hope that the E will go away.
What you can safely check
- Turn every element off and let the glass cool before touching the panel.
- Switch the cooktop off at its breaker for a full minute, then restore power.
- Wipe the keypanel with a clean, dry cloth.
- Think back: did a storm or a flicker of the lights come just before the E?
- If the E returns, stop using the cooktop and call us with the model number.
What our technician does for Er20
- Read Er20 in service mode and compare it with any other stored codes
- Confirm the ribbon cable and its plugs are seated firmly at the touch board before judging the board
- Replace the touch board only when the tests point to it, after a written price is approved
How to keep Er20 from coming back
- Protect the supply with a whole-home surge protector, since Florida thunderstorms can send surges through house wiring.
- Keep the keypanel dry and clean, wiping with a soft cloth instead of spraying cleaner near the keys.
- Jot down the date of any outage or flicker so a technician can compare it with when the E appeared.
Technical reference
- Code
- Er20
- Appliance
- Monogram cooktop
- Control family
- Monogram ZHU30 and ZHU36 induction cooktops
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram cooktop error codes
Er20 questions
Is Er20 the same as Er22 or Er39?
They are separate codes that all point to the touch board. A technician reads which number is stored, and that history shows how the board has been behaving.
Does cracked glass cause Er20?
Not on its own. The code concerns electronics under the glass, so an intact surface can still show it. Visible cracks are a different problem, and the cooktop should be switched off if you see any.
Can I clean the keys with spray cleaner?
Avoid it. Liquid that runs under the glass can upset the touch board. Use a dry or barely damp soft cloth, with the cooktop off and cool.
Can a power flicker cause Er20 by itself?
A short interruption can upset control electronics, so it is worth noting whether the E followed a storm or outage. If power was clearly the trigger and the E stays away after a reset, keep watching. A repeat points to the board.
What details help a technician diagnose Er20?
Tell us the model, such as the ZHU30 or ZHU36, what the display shows, which keys fail, and whether a storm or outage came first. A note on whether any zone still heats is useful too.
Need help with Er20?
We trace the cause in your home first and write the price down before any part is swapped.