(813)750-0388 Book a Repair
Monogram wall oven error code

Monogram ZET Double Oven Error C4: Lower Relay Board

C4 is a Monogram ZET double oven code. The control can no longer reach the lower relay board, the part that switches heat for the lower cavity, and the display stays silent about it.

Needs attention soonChecked November 2026

What does Monogram wall oven code C4 mean?

The lower cavity of a double oven in the Monogram ZET1 and ZET2 convection wall oven series, for example the ZET1PL1SS or the ZET2SL1SS, has its own relay board for switching heating elements. C4 is a stored record that the control stopped hearing from it. It is kept in memory and not shown. Typical signs are a lower oven that does not heat, heats only partly, or fails to start, while the upper oven keeps working as it should.

C4 at a glance

Code
C4
Appliance
Monogram wall oven
Applies to
Monogram ZET1 and ZET2 double convection wall ovens
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A plug on the harness to the lower relay board that has loosened

What you may notice with C4

  • The lower oven stays cool while the upper oven heats normally
  • The lower oven warms only partly or very slowly
  • A bake will not start in the lower cavity
  • The display gives no sign of an error

How the wall oven detects C4

A double ZET wall oven has two cavities, and each has its own relay board for switching heating elements. The main control sends a command to the lower relay board whenever the lower oven should heat, then waits for the board to answer.

If that answer stops, the control stores C4 in memory. It can no longer be certain the lower elements are switching as asked, so the lower oven may not heat, may heat in part, or may not start. The upper oven runs on a separate relay board, which is why it can keep working normally. The code is never shown, so the clue is how the two cavities differ.

Likely causes of C4

  • A plug on the harness to the lower relay board that has loosened
  • The lower relay board no longer replying
  • Wiring between the boards that is damaged
  • The communication output of the main control board

Can you keep using the wall oven with C4?

Can you keep using the oven with C4? Leave the lower oven alone until it is tested. The control cannot confirm what the lower elements are doing, so heating may be partial or unpredictable. If the upper oven bakes normally, you can cook there in the meantime, watching it closely. Switch both off and let them cool if anything seems wrong.

What you can safely check

  1. Switch both ovens off at the controls and let them cool before you open either door.
  2. Run each oven separately on a plain bake, upper first and then lower.
  3. Write down which oven fails to heat.
  4. Check whether the lower oven stays cold while the upper one warms.
  5. If the lower oven stays cold, stop using it and tell us how the upper oven behaved.

What our technician does for C4

  • Test both cavities separately to compare their behavior
  • Check the harness plugs at the lower relay board
  • Test the lower relay board before replacing it
  • Inspect the wiring between the boards for damage

How to keep C4 from coming back

  • Keep spills out of the lower oven door area, since moisture can reach the connectors behind the control.
  • Close the lower door gently so harness plugs are not shaken loose.
  • Notice early if the lower oven begins to heat slowly.

Technical reference

Code
C4
Appliance
Monogram wall oven
Control family
Monogram ZET1 and ZET2 double convection wall ovens
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

C4 questions

Can a single oven show C4?

No. C4 through C6 involve the lower oven, so they belong to double models only. A single oven has no lower cavity to lose contact with.

What exactly was lost?

The control could not reach the lower relay board, the part that switches the lower elements on and off.

Does the upper oven keep working?

It frequently does, though that depends on the wiring. A technician tests both ovens separately to be sure.

Is C4 the same as C1?

They describe the same kind of problem on different cavities. C1 involves the upper relay board and C4 the lower one, so C4 is the one that points at the lower oven.

What happens if I ignore it?

The lower oven may stop heating altogether, and cooking in it meanwhile risks uneven results. Setting that cavity aside until it is tested keeps the working parts safe.

Need help with C4?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair