Monogram ZET Oven SF Menu Will Not Open: Two-Key Hold
The SF special features menu on a Monogram ZET wall oven opens when you press PROBE and DELAY START together for four seconds. Releasing early is the usual reason it does not appear.
What does Monogram wall oven code SF mean?
SF is the special features menu on Monogram ZET1 and ZET2 convection wall ovens, for example the ZET1PL1SS or the ZET2SL1SS. Pressing PROBE and DELAY START at once and keeping both down for four seconds opens it. Owners who cannot get SF to show are mostly letting go too soon or pressing the keys one after the other. From there you can reach items like the thermostat offset and Sabbath mode.
SF at a glance
- Code
- SF
- Appliance
- Monogram wall oven
- Applies to
- Monogram ZET1 and ZET2 convection wall ovens
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- The two keys not pressed together
What you may notice with SF
- The display keeps showing the time of day after you press the keys
- SF never appears even though both keys feel pressed
- One key seems to respond and the other does not
- The menu opens on a later try
How the wall oven detects SF
The SF menu on a ZET wall oven is hidden on purpose. It holds special features, including the thermostat offset and Sabbath mode, that are not needed day to day. The control opens it only when it senses two particular keys, PROBE and DELAY START, held down together.
The control also waits a set time before it opens the menu, which is four seconds. If either key is released before then, the request is dropped and the clock face simply returns. Pressing the keys one after another, instead of together, has the same result. So a menu that fails to open is usually about timing, and only rarely a bad key.
Why SF appears
- The two keys not pressed together
- The keys released before four seconds are up
- One of the two keys not registering
Can you keep using the wall oven with SF?
Can you keep using the oven if SF will not open? Yes. The menu only holds extra settings, and normal baking does not depend on it. Make sure the oven is off and cool before you try again. If one key will not respond for its normal job either, switch the oven off and have the keypad tested.
What you can safely check
- Check that the oven is off and nothing is baking before you start.
- Push PROBE and DELAY START down at the very same moment.
- Keep both held for a full 4 seconds.
- Watch for SF on the display before you let go.
- If only the time of day shows, try again, and let us know if one key seems completely dead.
What our technician does for SF
- Test each key alone and then the pair
- Check the keypad and its connection if a key is dead
- Confirm the exact model before advising any setting
- Test the control if a working key still fails in the pair
How to keep SF from coming back
- Press both keys at the same instant and count the full four seconds.
- Keep the keypad free of grease so each key registers.
- Write down any setting you change in the menu.
Technical reference
- Code
- SF
- Appliance
- Monogram wall oven
- Control family
- Monogram ZET1 and ZET2 convection wall ovens
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram wall oven error codes
SF questions
Which two keys open the SF menu?
PROBE and DELAY START, held together for four seconds. On a ZGP gas range, the Timer and the Mini-Knob open the same menu.
Why does a quick tap fail?
The control waits a full four seconds before showing the menu. Letting go sooner cancels the request, so count while both keys stay down.
What if one key seems dead?
Press each key alone and see whether it does its normal job. A key that does nothing at all means the keypad needs a look, and the pad with its connection can be tested.
Is SF an error message?
No. SF is a menu of special features, not a sign of a problem. It stays hidden until the two keys are held together, and it is where settings like the thermostat offset live.
What details help if the menu never opens?
Your model number and whether each key works alone. If one key is dead, the keypad is the likely cause. If both work, the timing of your press is the more likely reason.
Something else going on with your wall oven?
We trace the cause in your home first and write the price down before any part is swapped.