(813)750-0388 Book a Repair
Monogram rangetop error code

Monogram Rangetop E5: Startup Ignition Check Failed

E5 on a Monogram rangetop means the startup check found that one or more burners cannot be ignited, so normal cooking cannot begin. It is wider than E1, which names a single burner.

Needs attention soonChecked November 2026

What does Monogram rangetop code E5 mean?

E5 appears at startup when the rangetop cannot ignite one or more of its burners, and normal cooking stays blocked until that is sorted out. It is a wider startup problem than E1, where the ignition failure is limited to a single burner. Because it shows up when the unit powers on, it reflects what the startup self-test found across the burners, or a failure in the board's startup sequence itself. A full restart is worth trying first.

E5 at a glance

Code
E5
Appliance
Monogram rangetop
Applies to
Monogram gas rangetop with electronic ignition
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The self-test at power-up flagged ignition trouble on more than one burner

What you may notice with E5

  • E5 appears as soon as the rangetop is powered up
  • One or more burners click but never light
  • Normal cooking does not start after the startup check
  • The code comes back after a full power restart

How the rangetop detects E5

Each time a Monogram rangetop is powered up, its control board runs a startup check before it lets you cook. Part of that check looks at the ignition system: the board expects every burner to be ready to light and to confirm a flame when asked. E5 is the board's way of saying that startup could not finish properly.

Unlike E1, which reports one burner whose igniter sparks but never proves a flame, E5 reports a problem that reaches more than one burner or the startup routine itself. The board holds back normal cooking because it cannot confirm that burners will light the way they should. That makes shared parts, such as the board's own startup logic, worth checking as well as the individual igniters and valves.

Likely causes of E5

  • The self-test at power-up flagged ignition trouble on more than one burner
  • The control board's startup sequence did not complete

Can you keep using the rangetop with E5?

Do not try to cook on the rangetop while E5 is showing. The unit is telling you it cannot confirm ignition on its burners, and a burner that does not light can release gas into the room. Turn the knobs to off. If you ever smell gas, leave the home at once and phone the gas utility from a safe place outside.

What you can safely check

  1. Turn all knobs to off and switch off the rangetop's breaker before touching anything.
  2. Wait briefly, restore the breaker and let the rangetop start up again.
  3. If you smell gas at any point, leave the home, do not touch switches or phones inside, and call the gas utility or 911 from outside.
  4. If E5 returns at startup and burners will not light, stop using the rangetop and call us.

What our technician does for E5

  • Run the same ignition diagnosis used for E1 on each burner
  • Test igniters and gas valves burner by burner to see whether the problem is shared or separate
  • Check the control board's startup sequence and replace the board if it fails

How to keep E5 from coming back

  • Keep burner caps and bases seated and free of boiled-over food so every burner can light cleanly.
  • Clean spills once the burners are cool, and keep moisture away from the igniter area.
  • Salt air and humidity along Florida's coast can corrode connections, so keep the rangetop surface and control area dry.

Technical reference

Code
E5
Appliance
Monogram rangetop
Control family
Monogram gas rangetop with electronic ignition
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

E5 questions

How is E5 different from E1 on a Monogram rangetop?

E1 points to one burner whose igniter fires without confirming flame. E5 appears at startup and covers one or more burners, so the whole ignition setup, including the board's startup routine, gets looked at.

Can I light burners another way while E5 shows?

Do not try to work around the startup check, with matches or anything else. The code tells you the rangetop cannot confirm ignition safely, and it should be diagnosed before any cooking.

Does a restart at the breaker clear E5?

It can, when the startup sequence only stumbled once. If E5 appears again after a full restart, there is an ignition-system problem underneath that needs diagnosis, much like an E1 would.

What should I mention about E5 when I contact the technician?

Say that the code appears at startup, how many burners fail to light, and whether E1 ever showed on a single burner before. That history helps separate a shared startup problem from one bad igniter.

Is it dangerous to ignore E5?

Ignoring it leaves the rangetop unable to confirm ignition, which is a safety concern on a gas appliance. The code is there to hold back cooking, so using the unit while it is active is not recommended.

Need help with E5?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair