Monogram Range Hood E1: Fan Motor Current Problem
E1 on a Monogram range hood means the blower motor drew more current than its rating allows, so the hood cut power to protect it. Clogged filters or blocked ducts are the first things to check.
What does Monogram hood & ventilation code E1 mean?
E1 means the hood's blower motor pulled more current than it is rated to handle, and the control shut the blower off to protect the motor. When the exhaust path is restricted, the motor labors harder, so grease-clogged filters and blocked or crushed ductwork are the first places to look. If the airflow is clear, the blower motor itself may have failed or may be seizing.
E1 at a glance
- Code
- E1
- Appliance
- Monogram hood & ventilation
- Applies to
- Monogram range hood with blower motor current protection
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Filters clogged with grease that restrict airflow
What you may notice with E1
- The fan stops and E1 appears on the hood
- Airflow was weak before the blower cut out
- Filters look thick with grease or the vent is blocked
- The fan will not start again after the code appears
How the hood & ventilation detects E1
The blower motor in a Monogram range hood draws a measurable amount of electrical current while it runs, and the hood keeps track of it. A motor moving air freely draws a steady, modest amount. When something holds the air back, the motor strains and the current rises.
E1 is the control's response to that rise. The hood compares the motor's current with its rated threshold, and when the threshold is passed, the control cuts power to the blower so the motor is not damaged. Filters thick with grease, or a duct that is blocked or crushed, restrict the flow and push the current up. A blower motor that is seizing or has failed can draw excess current even when the air path is clear. The motor sits on its own circuit, so testing it is not an owner job.
Likely causes of E1
- Filters clogged with grease that restrict airflow
- Ductwork that is blocked or crushed
- A blower motor that has failed or is seizing up
Can you keep using the hood & ventilation with E1?
Leave the blower off while E1 is showing. The control has shut it down because the motor was drawing too much current, and restarting repeatedly can strain it further. Once the filters are clean and the vent is clear you can try a low speed, but if E1 returns, stop using the fan until the motor has been tested.
What you can safely check
- Turn the hood off and, if you will handle the filters, switch off its breaker and let it cool.
- Remove the filters and check them for grease buildup; clean them as the hood's instructions describe.
- Look at the visible duct run and the outside vent cap for crushing or blockage.
- Restore power and run the fan on low. If E1 returns, call us.
What our technician does for E1
- Test the blower motor, which runs on its own circuit
- Measure the motor's current against what the hood expects
- Replace a blower motor that is seizing or has failed
How to keep E1 from coming back
- Clean grease filters regularly so the blower never has to fight clogged mesh.
- Make sure the duct and outside vent cap stay open and uncrushed after any work near the hood.
- Run the fan on a lower speed for light cooking so the motor is not working hard unnecessarily.
Technical reference
- Code
- E1
- Appliance
- Monogram hood & ventilation
- Control family
- Monogram range hood with blower motor current protection
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram hood & ventilation error codes
E1 questions
Why do greasy filters cause E1?
Grease clogs the filter mesh and restricts airflow. The blower then works harder to move air, draws more current and can reach the threshold that triggers E1.
Can I clear E1 by cleaning the ducts myself?
You can check what is visible, such as the outside vent cap, but cleaning inside ductwork can be difficult. A technician checks the run if the filters are clean and E1 returns.
How is E1 different from E4?
E1 reports too much current, while E4 reports that thermal protection tripped because the motor ran hot. Both can follow restricted airflow, so similar filter and duct checks apply.
Will E1 reset by itself?
It may clear after the hood is switched off and back on, but if the cause is a clogged filter or a blocked duct it will return. A code that repeats should be traced rather than reset again and again.
What should I note about E1 for the technician?
Say whether the filters were greasy, whether airflow felt weak before the fan stopped, and whether the vent outside looked clear. That helps separate an airflow restriction from a motor that is failing.
Need help with E1?
We trace the cause in your home first and write the price down before any part is swapped.