(813)750-0388 Book a Repair
Monogram hood & ventilation error code

Monogram Range Hood E3: LED Lighting Circuit Problem

E3 on a Monogram range hood points to a problem in the built-in LED lighting circuit. It is separate from the fan and blower, so the fan system is not part of this code.

Needs attention soonChecked November 2026

What does Monogram hood & ventilation code E3 mean?

E3 is a lighting circuit problem on a Monogram range hood. It is limited to the hood's built-in lights and has nothing to do with the fan or blower system. The cause may be as simple as a burned-out LED module, since some models have an LED assembly an owner can replace. It may also be a failure in the lighting circuit wiring or in the light switch or control. The fan keeps its own separate circuit.

E3 at a glance

Code
E3
Appliance
Monogram hood & ventilation
Applies to
Monogram range hood with built-in LED lighting
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
An LED module that has burned out

What you may notice with E3

  • E3 appears on the hood while the fan works normally
  • The built-in lights stay dark or will not switch on
  • The lights do not respond when you press the light switch

How the hood & ventilation detects E3

The lights on a Monogram range hood run on a low-voltage circuit that is separate from the fan and blower. The hood's controls send power to the LED module when you press the light switch, and they expect the circuit to behave normally.

E3 is reported when that lighting circuit is not working as expected. The simplest explanation is an LED module that has burned out and no longer lights. Other explanations are wiring in the lighting circuit that has failed, or a switch or control that no longer sends the signal. Because the lighting circuit is isolated, a lighting problem does not stop the fan from running or change how the blower is protected. It also means that looking at the LED module carries no safety exposure beyond ordinary care.

Likely causes of E3

  • An LED module that has burned out
  • Failed wiring in the lighting circuit
  • A light switch or control that has failed

Can you keep using the hood & ventilation with E3?

Yes, you can keep using the hood's fan with E3 showing, because the code concerns only the lights. Use another light source over the cooktop while the hood lights are out. If you notice a burning smell, sparks or heat from the lighting area, switch the hood off at the breaker and stop using it.

What you can safely check

  1. Turn the hood off at its controls and, if you plan to touch the lights, switch off its breaker and let the bulbs cool.
  2. Look at whether the light is dark because a single LED module has burned out.
  3. If your model has an owner-replaceable LED assembly, read the instructions that came with the hood before replacing it.
  4. If the lights stay dark or E3 stays on after that, call us.

What our technician does for E3

  • Test the LED module and replace it if it has failed
  • Check the lighting circuit wiring for a failure
  • Test the light switch or control

How to keep E3 from coming back

  • Wipe the hood's light area gently when cool so grease does not build up around the LED module.
  • Keep steam and grease away from the lighting area by running the fan while you cook.
  • Humid kitchens put more moisture on controls, so wipe the light switch area dry.

Technical reference

Code
E3
Appliance
Monogram hood & ventilation
Control family
Monogram range hood with built-in LED lighting
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

E3 questions

Does E3 mean my range hood fan is broken?

No. E3 applies only to the built-in lighting, which runs on a circuit separate from the fan and blower system. The fan can be judged by its own performance.

Can I replace the LED module myself?

Some models have an owner-replaceable LED assembly, so check the instructions for your hood. If the hood is a different style or the lights still fail, the circuit needs a technician's testing.

Is it safe to cook under a hood showing E3?

In terms of this code, yes, since E3 has no safety exposure from the LED module itself. You may simply need extra light over the cooktop until the hood lights are repaired.

Should I replace the LED module before calling for service?

If your hood has an owner-replaceable LED assembly and the module looks burned out, replacing it is a reasonable first step. If the new module does not light, the wiring or switch is the next place to look.

What should I describe about E3 before the technician arrives?

Describe whether the lights are fully dark, whether the fan still works, and whether you changed the LED module. That shows whether the problem is the module, the wiring or the switch.

Need help with E3?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair