Monogram Range Hood E2: Air Quality Sensor Problem
E2 on a Monogram range hood means the air quality sensor is not giving the control board a valid reading. It affects only the automatic fan-speed feature on hoods that have it.
What does Monogram hood & ventilation code E2 mean?
E2 is an air quality sensor problem. It matters on Monogram range hoods that adjust fan speed automatically, because the sensor is not sending the control board a valid reading. Manual fan-speed control is not affected, so the hood still works when you pick a speed yourself. A film of grease over the sensor vent or a sensor that has failed are the two causes listed for this code.
E2 at a glance
- Code
- E2
- Appliance
- Monogram hood & ventilation
- Applies to
- Monogram range hood with automatic fan-speed sensing
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Grease residue covering the sensor vent
What you may notice with E2
- E2 shows on a hood that normally adjusts fan speed itself
- Automatic mode no longer changes the fan speed
- Manual fan speeds still work as normal
- A grease film is visible around the sensor vent
How the hood & ventilation detects E2
Some Monogram range hoods can raise or lower fan speed on their own by sensing the air above the cooktop. A small air quality sensor sits behind a vent and sends readings to the control board. The board uses those readings to decide how hard the fan should work.
E2 appears when the readings stop making sense or stop arriving. Grease residue is one reason, because a coated vent keeps air from reaching the sensor. A sensor that has failed gives the same result. The board then cannot trust automatic mode, so it reports the code. Nothing about the fan motor is involved, which is why manual speed settings keep working as normal. The manual controls send commands directly and do not rely on the sensor at all.
Likely causes of E2
- Grease residue covering the sensor vent
- A sensor that has failed
Can you keep using the hood & ventilation with E2?
Yes, the hood is fine to use with E2 as long as you run the fan on manual speeds. Only the automatic feature is affected. Choose a speed high enough to clear smoke and steam yourself, since the hood will not adjust for you. If you see smoke or smell burning, switch the hood off at the breaker.
What you can safely check
- Switch the hood off and, before wiping near any opening, switch off its breaker and let the hood cool.
- Look at the sensor vent and, if grease is visible, wipe the outside of it gently with a dry or barely damp cloth; do not push anything into it.
- Use the manual fan speeds instead of automatic mode.
- If E2 returns after cleaning, keep using manual speeds and call us about the automatic feature.
What our technician does for E2
- Inspect the air quality sensor vent for grease buildup
- Test the sensor's signal to the control board
- Replace the sensor if it no longer gives a valid reading
How to keep E2 from coming back
- Run the fan whenever you cook so steam and grease do not settle on the sensor vent.
- Wipe the area around the sensor vent when the hood is cool and off, using a dry or barely damp cloth.
- Clean the grease filters regularly so less grease reaches the sensor.
Technical reference
- Code
- E2
- Appliance
- Monogram hood & ventilation
- Control family
- Monogram range hood with automatic fan-speed sensing
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram hood & ventilation error codes
E2 questions
Can I still cook under the hood with E2 showing?
Yes. E2 affects only automatic fan-speed sensing, so you can run the fan at a manual speed. Pick a speed that clears steam and smoke while you cook.
Why would grease stop the sensor from working?
The sensor reads the air through a small vent. When grease coats that vent, the air cannot reach the sensor properly, so the board receives a reading it cannot use.
Does my hood have an air quality sensor?
Only hoods with automatic fan-speed sensing use one. If your hood shows E2, it has that feature, and the code is the control board saying the sensor reading is not valid.
Will the hood stop working entirely with E2?
No. The code concerns only automatic fan-speed sensing, and manual speeds should keep working. If the fan stops responding altogether, tell the technician, because that would be a separate problem.
Will E2 clear on its own after cleaning?
If a grease film was the cause, wiping the vent area clean may let the sensor read again and the code may clear. If E2 stays after cleaning, the sensor itself has likely failed and needs replacing.
Need help with E2?
We trace the cause in your home first and write the price down before any part is swapped.