(813)750-0388 Book a Repair
Monogram cooktop error code

Monogram Gas Cooktop Error F9: Burner Igniter Timeout

F9 on a Monogram gas cooktop means the igniter tried to light a burner but never confirmed a flame in time. A misaligned or clogged burner cap is the first thing to look at.

Needs attention soonChecked November 2026

What does Monogram cooktop code F9 mean?

F9 appears on a gas, rangetop-style Monogram cooktop when a burner fails to light on request. The electronic igniter sparked, yet the control did not get confirmation of a flame before its waiting time ran out, so it ended the attempt and reported an igniter timeout. A burner cap that sits crooked and food debris in the ports are the simplest explanations. A dirty or worn igniter electrode, or a gas valve that does not open fully for that burner, needs testing. The message does not name a particular series.

F9 at a glance

Code
F9
Appliance
Monogram cooktop
Applies to
Monogram gas rangetop-style cooktops
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Burner cap sitting off-center or ports packed with food debris

What you may notice with F9

  • One burner clicks and sparks but never lights.
  • The display shows F9 after a burner fails to ignite.
  • Other burners on the same cooktop may still light normally.

How the cooktop detects F9

When you turn a burner knob to light, the control sends a spark through the igniter electrode while gas starts to flow to that burner. The board then waits for confirmation that a flame has actually formed. If confirmation does not arrive within the expected window, it stops the attempt rather than keep releasing gas, and it shows F9.

Anything that keeps the spark from reaching gas, or the gas from reaching the spark, can lead to this. A cap that sits crooked or ports plugged with spills change where gas flows. An electrode covered in residue throws a weak spark, and a gas valve that opens only partway starves the burner. The control treats each of these the same way, as a flame that never confirmed.

Likely causes of F9

  • Burner cap sitting off-center or ports packed with food debris
  • Igniter electrode coated with residue or no longer sparking
  • Gas valve for that one burner not opening all the way

Can you keep using the cooktop with F9?

If the other burners light normally you can use them, but leave the F9 burner off until it has been checked. Do not keep turning that knob again and again, since gas can collect around a burner that is not lighting. If you smell gas at any time, leave the home immediately, avoid switches and phones inside, and call the gas utility from outside.

What you can safely check

  1. Turn every burner knob off and let the cooktop cool completely; if you smell gas, leave the home now, do not touch switches or phones inside, and call the gas utility or 911 from outside.
  2. Lift off the burner cap and look for food debris in the ports.
  3. Set the cap back so it sits flat and level on the burner base.
  4. Make sure everything is dry, then try lighting that burner once.
  5. If F9 returns with a clean, seated burner, stop using that burner and have a technician test the igniter and gas valve.

What our technician does for F9

  • Test the igniter electrode for a clean spark at that burner
  • Check that the gas valve for the burner opens fully when commanded
  • Inspect cap and port seating, then replace a worn igniter or valve part

How to keep F9 from coming back

  • Wipe up boil-overs and clear the burner ports after cooking so food debris cannot block the gas or the spark.
  • Seat each burner cap flat after cleaning, and dry it fully before lighting.
  • In humid Tampa Bay kitchens, let washed burner parts dry completely, since leftover moisture can interfere with a clean spark.

Technical reference

Code
F9
Appliance
Monogram cooktop
Control family
Monogram gas rangetop-style cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

F9 questions

Is F9 on my Monogram cooktop a gas leak?

F9 reports a failed light, not a leak. Still, if you smell gas at any point, leave the home, avoid switches and phones inside, and call the gas utility or 911 from outside.

Why does F9 show for only one burner?

The igniter and valve belong to each burner, so a clogged port, crooked cap or weak spark on one burner affects only that burner's light. Try the others to see whether they light normally.

Can I light the burner with a match instead?

We do not suggest it. When the igniter cannot confirm a flame, the cause needs finding first, and gas that builds up before a match is struck is a real hazard. Leave that burner unused until it is checked.

Is F9 the same as a burner that simply will not click?

Not quite. F9 means the igniter did try, and no flame was confirmed in time. A burner that never clicks at all points elsewhere, such as the spark circuit, so tell us which behavior you see.

Will F9 clear by itself after the cap is reseated?

It can. If a crooked cap or clogged port was the only problem, the next light attempt confirms a flame and the message stops. If F9 returns, the igniter or gas valve for that burner needs testing.

Need help with F9?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair