(813)750-0388 Book a Repair
Monogram dishwasher error code

Monogram Dishwasher Check: Sanitized Light Not Lit at End of Cycle

The Sanitized light on a Monogram ZDT or ZDP dishwasher stays dark when an open door interrupted the final rinse, or when the hot water arriving was too cool.

Maintenance reminderChecked November 2026

What does Monogram dishwasher code Sanitized Light Not Lit at End of Cycle mean?

Touch-control ZDT and ZDP Monogram dishwashers, including the ZDT985SPNSS and the ZDT800SPFSS, are meant to light the Sanitized indicator when a sanitizing cycle ends. A dark light means one of two things: the door came open during the final rinse, or the water entering was too cool. Your dishes still got washed, but the sanitizing step went unconfirmed, and the cycle simply ends with that light missing.

Sanitized Light Not Lit at End of Cycle at a glance

Code
Sanitized Light Not Lit at End of Cycle
Appliance
Monogram dishwasher
Applies to
Monogram ZDT and ZDP touch-control dishwashers with a sanitizing cycle
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
The door came open before the final rinse had finished

What you may notice with Sanitized Light Not Lit at End of Cycle

  • The cycle ends and the Sanitized light never turns on
  • The dishes look clean and feel only warm
  • The door may have been opened close to the end
  • The kitchen tap takes a while to run hot

How the dishwasher detects Sanitized Light Not Lit at End of Cycle

A sanitizing cycle on a ZDT or ZDP dishwasher depends on two things being true at the end. The water in the final rinse must reach the temperature the cycle requires, and the cycle must run to its finish without interruption. The control watches both, and only then does it light the Sanitized indicator.

If the door opens during the final rinse, the control abandons that step and the light stays off. If the hot water arriving from the house is too cool, the heat the cycle adds may not be enough to confirm the result. The wash itself still completes, which is why the dishes come out clean. Only the confirmation is missing.

Why Sanitized Light Not Lit at End of Cycle appears

  • The door came open before the final rinse had finished
  • Hot water reaching the dishwasher was too cool
  • The water heater sits below the range the cycle needs
  • The hot water line takes a long time to bring warm water to the dishwasher

Can you keep using the dishwasher with Sanitized Light Not Lit at End of Cycle?

Yes. The dishwasher still cleans, and nothing here is dangerous. If you rely on the sanitizing step, rerun that cycle with the door left closed and the hot water warmed up first. If the Sanitized light stays dark every time even with correct heat, tell us, because the heating or temperature circuit may need a test.

What you can safely check

  1. Let the cycle end and the tub cool before you open the door, and never open it while it washes.
  2. Set the water heater somewhere from 120 to 150 degrees F.
  3. Before starting, let the kitchen tap run hot until the pipe warms up.
  4. Start the sanitizing cycle once more and look at the light when it finishes.
  5. If it stays dark with hot water and a closed door, call us.

What our technician does for Sanitized Light Not Lit at End of Cycle

  • Measure the water temperature entering the dishwasher
  • Test the heating and temperature circuit if the light stays dark under correct conditions
  • Provide a written price before any repair

How to keep Sanitized Light Not Lit at End of Cycle from coming back

  • Leave the door shut from the start of a sanitizing cycle until it ends.
  • Run the kitchen tap until it is hot before you start the dishwasher.
  • Keep the water heater inside the 120 to 150 degrees F range.

Technical reference

Code
Sanitized Light Not Lit at End of Cycle
Appliance
Monogram dishwasher
Control family
Monogram ZDT and ZDP touch-control dishwashers with a sanitizing cycle
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

Sanitized Light Not Lit at End of Cycle questions

Are my dishes dirty if the Sanitized light is off?

They are washed, but the dishwasher did not confirm the sanitizing step. If you need sanitized results, rerun the cycle with a closed door and hot water.

How hot should the water heater be?

The input for this model calls for a setting between 120 and 150 degrees F. Higher settings can scald, so change it carefully and ask us if you are unsure.

Can opening the door early cause this?

Yes. Opening the door during the final rinse interrupts the sanitizing step, so the light never comes on even though the cycle appears to finish.

Is this the same as a heating element problem?

Not necessarily. A closed door and hot water often solve it, so the heating circuit is tested only when the light stays dark after those basics are right.

Will the light return by itself later?

Yes, if the cause was an opened door or cool water. The light works again on a later sanitizing cycle that runs uninterrupted with hot water coming in.

Something else going on with your dishwasher?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair