Monogram Dishwasher POTS Light Flashing: No Water in the Chef’s Washer
A flashing POTS light on a Monogram dishwasher means the motor starts but water never enters the Chef's Washer. That points to a water supply problem, such as a closed or kinked supply.
What does Monogram dishwasher code POTS Light Flashing mean?
On a Monogram dishwasher, a flashing POTS light signals that the motor starts but no water enters the Chef's Washer. The dishwasher is trying to run, yet the tub is not filling, which points to the water supply rather than to the motor. In practice the supply to the dishwasher may be restricted or turned off. The first things worth looking at are the valve under the sink and the supply line leading to the dishwasher. If the supply is open and clear and the light keeps flashing, the cause lies elsewhere and needs a technician.
POTS Light Flashing at a glance
- Code
- POTS Light Flashing
- Appliance
- Monogram dishwasher
- Applies to
- Monogram dishwashers with the Chef's Washer and a POTS indicator
- Type
- Low urgency
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- The supply valve under the sink is closed or only partly open
What you may notice with POTS Light Flashing
- The POTS light flashes while the dishwasher is trying to run
- You hear the motor but little or no water fills the tub
- The cycle does not progress to normal washing
- Dishes come out dry and unwashed after a stopped cycle
How the dishwasher detects POTS Light Flashing
A dishwasher cycle begins by filling the tub. The control opens an inlet valve and expects water to arrive before it moves on to washing. The motor is started as part of the cycle, so the control is watching to see that water actually follows.
When the motor starts and no water enters the Chef's Washer, the control sees that the expected fill never happened. It cannot carry on with a wash in an empty tub, so it flashes the POTS light to point you toward the water supply. The message is about water arriving, not about how clean the dishes are.
Likely causes of POTS Light Flashing
- The supply valve under the sink is closed or only partly open
- The water supply line to the dishwasher is kinked or pinched
- Something is restricting the water flowing to the dishwasher
Can you keep using the dishwasher with POTS Light Flashing?
If the supply valve was closed and the light clears once you open it, you can keep using the dishwasher. If the POTS light keeps flashing, stop running it. A motor turning without water is not something to leave going, so switch it off at the breaker until the water supply has been checked.
What you can safely check
- Stop the cycle, switch the dishwasher off at the breaker, and let it sit before you touch anything.
- Look under the sink and confirm the dishwasher supply valve is fully open.
- Look along the visible supply line for a kink or a bend that pinches it.
- Turn the breaker back on and restart the dishwasher.
- If the POTS light flashes again with the valve open and the line clear, call us.
What our technician does for POTS Light Flashing
- Confirm that water reaches the dishwasher and that nothing is restricting the supply
- Test the inlet valve that lets water into the Chef's Washer
- Check the motor and control response when the cycle starts without water arriving
How to keep POTS Light Flashing from coming back
- Leave the supply valve under the sink fully open after any plumbing work.
- Check that the supply line is not pinched when items are moved under the sink.
- If hard or well water is used in your home, watch for a drop in water flow to the dishwasher.
Technical reference
- Code
- POTS Light Flashing
- Appliance
- Monogram dishwasher
- Control family
- Monogram dishwashers with the Chef's Washer and a POTS indicator
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram dishwasher error codes
POTS Light Flashing questions
Why does the motor run if there is no water?
The control starts the motor as part of the cycle, but it cannot make water arrive. If the supply is closed or restricted, the motor runs and the tub stays empty, which is what the flashing POTS light reports.
Can I fix a flashing POTS light myself?
You can check the simple things safely: the supply valve under the sink and any visible kink in the line. Anything behind a panel, including the inlet valve, should be left to a technician.
Is a flashing POTS light a drain problem?
No. A drain problem shows differently, with water that will not leave the Chef's Washer. POTS points to water that is not getting in.
Does POTS flashing mean the dishwasher is broken?
Not necessarily. The light says water is not reaching the Chef's Washer, and the cause is often a closed valve or a kinked line. If those are fine, a part such as the inlet valve may need to be tested.
What happens if I keep restarting it?
Restarting will not add water if the supply is blocked. The motor can keep starting with an empty tub, so it is better to stop and fix the supply first.
Need help with POTS Light Flashing?
We trace the cause in your home first and write the price down before any part is swapped.