(813)750-0388 Book a Repair
Monogram dishwasher error code

Monogram Dishwasher RINSE ONLY Light Flashing: Drain Blockage Explained

A flashing RINSE ONLY light on a Monogram dishwasher means the Chef's Washer is not draining. It points to a drain blockage, often at the filter, hose, air gap or disposal connection.

Low urgencyChecked November 2026

What does Monogram dishwasher code RINSE ONLY Light Flashing mean?

When the RINSE ONLY light flashes on a Monogram dishwasher, water is not emptying out of the Chef's Washer. The dishwasher has filled and washed, but the water has nowhere to go, which indicates a drain blockage. The blockage may be in the filter inside the tub, in the drain hose, at the air gap, or at the garbage disposal connection, where a knockout plug can be left in place. These are all spots you can look at without opening the dishwasher. If clearing them does not stop the light, a technician needs to test the drain.

RINSE ONLY Light Flashing at a glance

Code
RINSE ONLY Light Flashing
Appliance
Monogram dishwasher
Applies to
Monogram dishwashers with the Chef's Washer and a RINSE ONLY indicator
Type
Low urgency
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The drain hose or air gap is blocked

What you may notice with RINSE ONLY Light Flashing

  • The RINSE ONLY light flashes at the end of or during a cycle
  • Water remains in the bottom of the tub after the cycle
  • Dishes may look cloudy or have food left on them
  • A gurgle or slow drain can be heard at the sink

How the dishwasher detects RINSE ONLY Light Flashing

After a wash or rinse, a dishwasher has to empty the tub before it can start the next stage. The drain pump pushes water out through the filter, the drain hose and then either an air gap or the garbage disposal connection into the home's plumbing.

The control expects the water to leave. If the tub keeps its water instead of draining, the control reads that as a drain blockage and flashes the RINSE ONLY light. It cannot safely go on filling or washing when the tub will not empty, so the light is its way of asking you to check the drain path.

Likely causes of RINSE ONLY Light Flashing

  • The drain hose or air gap is blocked
  • The filter in the tub is clogged
  • The garbage disposal knockout plug was never removed, or the disposal connection is clogged

Can you keep using the dishwasher with RINSE ONLY Light Flashing?

Do not keep running full cycles while the tub holds water, because there is nowhere for more water to go. Once you have cleaned the filter and cleared the drain hose or connection, you can try one cycle. If the light flashes again, switch the dishwasher off at the breaker and have it looked at.

What you can safely check

  1. Stop the cycle, switch the dishwasher off at the breaker, and wait before reaching into the tub.
  2. Lift out the filter and rinse away food and debris.
  3. Look at the visible drain hose under the sink for a kink.
  4. Check the air gap, if you have one, and the disposal connection for a clog.
  5. Switch the breaker back on and restart. If the RINSE ONLY light flashes again, call us.

What our technician does for RINSE ONLY Light Flashing

  • Inspect the drain path from the Chef's Washer to the sink or disposal
  • Test the drain pump to see whether it runs and moves water
  • Check the control's response when water stays in the tub

How to keep RINSE ONLY Light Flashing from coming back

  • Rinse the filter regularly so food does not build up in the tub.
  • Scrape large food pieces off dishes before loading them.
  • Run the garbage disposal clear before starting the dishwasher if the two share a drain.
  • Make sure the drain hose under the sink is not bent or pinched.

Technical reference

Code
RINSE ONLY Light Flashing
Appliance
Monogram dishwasher
Control family
Monogram dishwashers with the Chef's Washer and a RINSE ONLY indicator
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..

FAQ

RINSE ONLY Light Flashing questions

Why is there standing water in my Monogram dishwasher?

Standing water with a flashing RINSE ONLY light means the dishwasher cannot drain. A clogged filter, a kinked drain hose or a blocked air gap or disposal connection are the places to look.

What is a garbage disposal knockout?

It is a plug in the disposal's dishwasher inlet. If it was not removed when the dishwasher was connected, or the inlet is clogged, water cannot drain through it.

Should I run the dishwasher again to clear the water?

Clear the filter and check the drain path first. Running another cycle with a blocked drain only adds more water to a tub that already cannot empty.

Is RINSE ONLY flashing the same as POTS flashing?

No. POTS means water is not entering the Chef's Washer, while RINSE ONLY means water is not leaving it. They are opposite problems and need different checks.

Will the light go away after I clean the filter?

If a clogged filter was the cause, the light should clear on the next cycle. If it does not, the blockage is further along the drain path, and we can test it for you.

Need help with RINSE ONLY Light Flashing?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813)750-0388 Book a Repair