Monogram Dishwasher Code C2: Long Drain Time Explained
C2 on a Monogram dishwasher means the unit is taking too long to pump water out between cycle phases. The drain hose, air gap and drain pump are what to look at.
What does Monogram dishwasher code C2 mean?
C2 is a long-drain problem on a Monogram dishwasher. Between the phases of a cycle the unit must pump water out, and it is taking longer than expected to do so. A kinked or clogged drain hose can slow it, as can a clogged air gap if one is installed at the sink. A drain pump that is failing may also be too weak. No series is named for this code.
C2 at a glance
- Code
- C2
- Appliance
- Monogram dishwasher
- Applies to
- Monogram dishwashers with a drain pump and hose
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Drain hose bent or clogged somewhere along its run
What you may notice with C2
- The display shows C2 and the dishwasher pauses between phases.
- Water sits in the tub for a long time after a drain.
- You hear the pump running, but the tub empties slowly.
How the dishwasher detects C2
Between the main steps of a wash, the dishwasher has to empty its tub. The drain pump pushes the water through the drain hose toward the home's plumbing, sometimes through an air gap at the sink, and the control allows a set time for the tub to empty. When the water takes longer than that, it shows C2.
Anything that narrows that route makes the drain slow. A hose with a kink or a clog resists flow, and an air gap that has clogged does the same. If both are clear, the drain pump itself may be weakening, and moving less water each second than it should. Because the pump sits under the tub, testing it means partial disassembly, which is why the owner checks stop at the hose and the air gap.
Likely causes of C2
- Drain hose bent or clogged somewhere along its run
- Air gap at the sink clogged, where the kitchen has one
- Drain pump weakening and emptying the tub slowly
Can you keep using the dishwasher with C2?
If the hose and air gap check out clear and the tub then drains normally, you can go on using the dishwasher. If C2 returns, stop running cycles, since water that drains slowly leaves dishes with dirty residue and can back up. Keep the dishwasher switched off at the breaker until the pump has been tested.
What you can safely check
- Stop the cycle, turn the dishwasher's breaker off, and leave hot water to cool before checking anything.
- Look at the drain hose behind the dishwasher where you can see it for kinks or a crushed section.
- If your sink has an air gap fitting, lift its cap and clear any debris.
- Restore power and run a short cycle, watching how fast the tub empties.
- If C2 returns after the hose and air gap are clear, leave it off so the pump can be tested.
What our technician does for C2
- Inspect the drain hose along its full length for kinks and blockage
- Test the drain pump for power and flow, which means partial disassembly
- Replace the pump when it cannot empty the tub in time
How to keep C2 from coming back
- Keep the drain hose free of kinks when the dishwasher is pushed back into its opening.
- Clear the air gap at the sink now and then, if your kitchen has one.
- Scrape food off dishes first so less debris reaches the drain path.
Technical reference
- Code
- C2
- Appliance
- Monogram dishwasher
- Control family
- Monogram dishwashers with a drain pump and hose
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram dishwasher error codes
C2 questions
What is an air gap, and do I have one?
It is a small fitting that stands on the sink or counter near the faucet, and the drain hose passes through it. Not every kitchen has one, so check yours.
Does C2 mean my sink drain is clogged?
Not necessarily. Test whether the sink drains freely. The code points at the dishwasher's own drain path, which includes the hose, the air gap and the pump.
Can I keep running cycles with C2?
Slow draining can leave dishes dirty and water standing in the tub, so do not keep running cycles until the cause is cleared.
Will C2 clear by itself?
It can if a temporary clog moved on, but a hose, air gap or pump problem will bring it back. Watch the next drain phase, and if it is slow again, have it tested.
What should I say about C2 when I describe it?
Mention whether you have an air gap, whether the sink drains well, and how long water stays in the tub. That helps us decide whether the hose or the pump comes first.
Need help with C2?
We trace the cause in your home first and write the price down before any part is swapped.