Monogram ZGP Gas Range F-co: The Stored F Code List
F-co on a Monogram ZGP gas range is a menu, not an error. It lists the last seven stored F codes inside the factory test mode, and owners seldom need it.
What does Monogram wall oven code F-co mean?
Nothing is wrong when F-co appears on a Monogram ZGP professional gas range such as the ZGP486ND. It is a menu tucked inside the factory test mode: the Timer display steps to F-co and lists the seven most recent stored F codes. Technicians read it to learn what the control has recorded. It is reached with the knob hold that opens the Prod test mode right after power-up, so seeing it unexpectedly means the mode was entered by accident.
F-co at a glance
- Code
- F-co
- Appliance
- Monogram wall oven
- Applies to
- Monogram ZGP professional gas ranges
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- The factory test mode reached by a hold on the Push To Select knob at power-up
What you may notice with F-co
- The Timer display cycles to F-co
- A short list of stored F codes may appear
- The oven functions do not respond as usual
- The display returns to normal after you exit the mode
How the wall oven detects F-co
A ZGP gas range keeps a short record of its own error events. Normally that record is hidden, and the control shows only the code that is active right now. The F-co menu is how a technician reads the record. It lives inside the factory test mode.
To reach it, the Push To Select knob is held down soon after power-up, which is also how the Prod test mode starts. Once inside, the Timer display steps to F-co and lists the last seven stored F codes. Nothing in that list means a current problem by itself. Stored codes can be old, so the useful question is whether the same one keeps appearing.
Why F-co appears
- The factory test mode reached by a hold on the Push To Select knob at power-up
- A technician looking through the stored codes
- A slip while the breaker was being switched back on
Can you keep using the wall oven with F-co?
Can you keep using the range with F-co showing? Leave the oven alone while the menu is on, because the test mode is not meant for cooking and can run loads on its own. Leave it by pressing and holding the Push To Select knob. After that the range can be used normally. If the display will not clear, turn the oven off and have it checked.
What you can safely check
- Make sure the oven is not heating and the burners are off before you do anything.
- Keep the Push To Select knob pressed for roughly three seconds to leave the mode.
- If the display does not clear, shut the oven off with its own controls.
- Wait until the display returns to the clock.
- If it keeps coming back, tell us.
What our technician does for F-co
- Read the last seven stored F codes
- Judge whether a stored code repeats or is only old history
- Decide what to test based on the list and how the range behaves
- Exit the test mode cleanly with the range ready
How to keep F-co from coming back
- Avoid holding the Push To Select knob while the range powers up after a breaker reset.
- Let anyone resetting the breaker know the knob should stay untouched.
- Keep a note of any code you see before the menu opens.
Technical reference
- Code
- F-co
- Appliance
- Monogram wall oven
- Control family
- Monogram ZGP professional gas ranges
- Maker documentation
- Monogram owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Related Monogram wall oven error codes
F-co questions
What is listed in the F-co menu?
The seven latest F codes the control stored. Together they form a history, so an old entry does not prove the problem is happening right now.
Can I look at it without risk?
Looking costs nothing, but the test mode can switch loads on by itself. Technicians prefer to enter it with the range prepared.
How do I get out of it?
Press and keep pressing the Push To Select knob for around three seconds. If the display stays put, shut the oven off at its controls and start no cycle until it has been checked.
Does F-co mean my range has a stored problem?
Not by itself. The menu is only a list of recent F codes, and an old code may never repeat. What matters is whether the same one keeps coming back, which is what a technician looks at.
Can I clear the stored codes myself?
The information on hand gives no owner step for that, so please avoid key combinations from the internet. Note what the display showed, and a technician can read the list properly.
Something else going on with your wall oven?
We trace the cause in your home first and write the price down before any part is swapped.