Monogram ZET2S repair
Double wall oven. Service for this model across Tampa Bay.

- Model
- ZET2S
- Type
- Double wall oven
- Brand
- Monogram
About the ZET2S
The Monogram ZET2S is a double wall oven, with two cavities stacked in one cabinet. Each cavity has its own heating elements and sensors, and the two share a central control module.
That arrangement gives us a helpful clue during a ZET2S visit. When a problem shows up in only one cavity, it points away from the shared board, since the board would affect both ovens. So we compare the upper and lower cavity, run each one separately, and see whether the issue follows a cavity or follows the control. A shared board with a single misbehaving cavity is a different job from a failed element. Narrowing it this way keeps the repair estimate honest before anything is ordered.
What we check on a ZET2S visit
- Upper and lower cavity operated separately
- Heating elements and sensors in the cavity with the problem
- Central control module if both cavities are affected
Key features
- Double wall oven with two cavities
- Separate heating elements and sensors for each cavity
- Shared central control module
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram wall oven codes
Codes listed for Monogram wall ovens. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram wall oven models
Wall OvenZEK737W27-inch convection single wall oven
Wall OvenZEK7500SHSS27-inch electric double wall oven
Wall OvenZEK757W27-inch convection double oven
Wall OvenZEK757WAWW27-inch white double convection wall oven
Wall OvenZEK937SDSS27-inch built-in electric single oven
Wall OvenZEK938F27-inch electronic convection single oven
Wall OvenZEK938M27-inch glass-touch single oven
Wall OvenZEK957D27-inch built-in electric double ovenZET2S questions
Only the lower oven on my ZET2S misbehaves. Is the control board bad?
Probably not. The two ovens share one board, so a single-cavity problem points toward that cavity's elements or sensors.
How do you test a double wall oven?
We run each cavity on its own and compare. That shows whether the problem follows one oven or the shared control.