Monogram ZEU365 repair
Electric cooktop with bridge zone. Service for this model across Tampa Bay.

- Model
- ZEU365
- Type
- Electric cooktop with bridge zone
- Brand
- Monogram
About the ZEU365
The Monogram ZEU365 is an electric cooktop with a bridge-zone feature. The bridge joins two neighboring elements into a single larger cooking area, which suits oversized pans and griddles.
When the bridge stops working on a ZEU365, the two elements normally still work on their own, and that tells us a lot. If each element heats when used separately, the elements are not the problem and the bridge relay moves to the top of our list. We test the zones alone, try the bridge, and compare. This saves you from replacing an element that was fine. Before any test we make sure the cooktop is off and cooled, as a surface that has just been used stays hot longer than it looks.
What we check on a ZEU365 visit
- Each element heating on its own
- Bridge-zone link when the two elements are joined
- Bridge relay if the elements work separately
Key features
- Bridge zone joining two adjacent elements
- Larger cooking area for oversized cookware
- Elements that operate independently
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram cooktop codes
Codes listed for Monogram cooktops. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram cooktop models
CooktopZEU304ABG30-inch black digital electric cooktop
CooktopZEU304ABG / ZEU304BWG30-inch electric cooktop, two finishes
CooktopZEU30RSFSS30-inch digital electric cooktop
CooktopZEU30RWFWW30-inch white ribbon electric cooktop
CooktopZEU365ABG / ZEU365BWG36-inch electric cooktop, two finishes
CooktopZEU36KBK36-inch rotary-knob electric cooktop
CooktopZEU36KSKSS36-inch ceramic-glass electric cooktop
CooktopZEU36RBFdigital electric cooktop, 36 inches wideZEU365 questions
The bridge on my ZEU365 does not work, but both elements heat alone. What does that mean?
It points to the bridge relay and not to either element. We confirm that by testing each zone separately and then the joined zone.
Will the ZEU365 need a new element if the bridge fails?
Usually the elements are fine if they heat on their own. We test them first so you only pay for the part that actually failed.