Monogram ZEU676Y repair
36-inch black ribbon cooktop. Service for this model across Tampa Bay.

- Model
- ZEU676Y
- Type
- 36-inch black ribbon cooktop
- Years
- 1996-2021
- Brand
- Monogram
About the ZEU676Y
Eight ribbon cooking areas and infinite heat rotary controls make up the ZEU676Y, a black 36-inch Monogram cooktop listed from 1996 to 2021. Overall it is 35 1/4 inches wide, 2 7/8 high and 20 5/8 deep, and the variant is ZEU676YSB.
With eight areas, we go through them one by one. If an area warms only on its highest setting, the infinite switch is suspect, while one that stays dark when others work is isolated from the rest. A switch that clicks yet gives no heat is traced at the connector and the ribbon. As on any glass cooktop, we examine the surface near each ribbon for cracks before writing up the repair.
What we check on a ZEU676Y visit
- Ribbon areas that warm only on the highest setting
- Infinite switch clicking with no heat behind it
- Area staying dark, and glass near each ribbon
Key features
- Black ribbon cooktop, 36 in. wide
- Eight cooking areas
- Rotary controls with infinite heat settings
- Overall width 35 1/4 in, height 2 7/8 in, depth 20 5/8 in
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram cooktop codes
Codes listed for Monogram cooktops. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram cooktop models
CooktopZEU304ABG30-inch black digital electric cooktop
CooktopZEU304ABG / ZEU304BWG30-inch electric cooktop, two finishes
CooktopZEU30RSFSS30-inch digital electric cooktop
CooktopZEU30RWFWW30-inch white ribbon electric cooktop
CooktopZEU365ABG / ZEU365BWG36-inch electric cooktop, two finishes
CooktopZEU36KBK36-inch rotary-knob electric cooktop
CooktopZEU36KSKSS36-inch ceramic-glass electric cooktop
CooktopZEU36RBFdigital electric cooktop, 36 inches wideZEU676Y questions
One of the eight areas stays dark on a ZEU676Y. What happens next?
We test that area's switch and its ribbon separately. If the switch sends power and the ribbon stays dark, the ribbon needs replacing.
Why would an area only heat at full?
The infinite switch may not be regulating the power it passes. We measure its output at each setting to confirm.