Monogram ZV36RSF repair
36-inch stainless professional hood, Professional. Service for this model across Tampa Bay.

- Model
- ZV36RSF
- Type
- 36-inch stainless professional hood
- Series
- Professional
- Years
- Current model
- Brand
- Monogram
About the ZV36RSF
Compared with the lower Professional hoods, the ZV36RSF stands taller, with a body 22.5 inches high, 36 wide and 25 deep. Monogram sells it as a current stainless steel hood meant for a 36-inch range or cooktop.
Grease and heat never relax above that kind of cooking surface. We run the blower through every speed, listening for imbalance, then test lights and switches. Filters are checked for grease load, and the duct joint for air leaks that dull the pull. A taller canopy collects grease near its top as well, so we look there before closing up.
What we check on a ZV36RSF visit
- Blower speeds and imbalance
- Filter grease load, including the canopy top
- Duct joint for air leaks
Key features
- Stainless 36-inch Professional hood
- 22.5-inch tall canopy
- Current Monogram model
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram hood & ventilation codes
Codes listed for Monogram hood & ventilations. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram hood & ventilation models
Hood & VentilationZV1050SFSS42-inch high-performance island hood
ProfessionalZV36SSJ36-inch low-profile professional hood
ProfessionalZV370YSS30-inch straight-sided halogen hood
ProfessionalZV371Y30-inch hood with infrared warming lamp
ProfessionalZV48SSJ48-inch stainless professional hood
ProfessionalZV670WSS36-inch taper-sided halogen hood
ProfessionalZV671W36-inch taper-sided warming hood
ProfessionalZV680Y36-inch straight-side halogen hoodZV36RSF questions
How tall is the ZV36RSF?
Monogram lists 22.5 inches high, 36 wide and 25 deep, taller than the ZV36SSJ. The label helps us confirm which parts apply.
Can you replace hood lights?
Yes, and we test the socket and switch too, since the bulb is not always the culprit when a hood light goes dark.