Monogram ZV371Y repair
30-inch hood with infrared warming lamp, Professional. Service for this model across Tampa Bay.

- Model
- ZV371Y
- Type
- 30-inch hood with infrared warming lamp
- Series
- Professional
- Years
- Legacy model
- Brand
- Monogram
About the ZV371Y
A warming lamp is the twist on the ZV371Y: one infrared lamp plus two halogens under a 30-inch Professional straight-sided hood. Monogram lists it as obsolete, at 29 7/8 wide, 18 high and 25 deep, in inches.
Since the infrared lamp produces heat on its own, its lamp and switch are tested separately from the cooking lights. Halogen sockets, blower speeds and filter grease follow. Any heat smell or overheating makes us stop and trace wiring before the hood runs again. We also inspect wiring near the warming lamp, because it runs far hotter than its neighbors.
What we check on a ZV371Y visit
- Warming lamp and its own switch
- Halogen sockets and nearby wiring
- Blower speeds and filters
Key features
- Professional stainless hood
- One infrared warming lamp, two halogens
- Just under 30 in wide
- Obsolete model
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram hood & ventilation codes
Codes listed for Monogram hood & ventilations. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram hood & ventilation models
Hood & VentilationZV1050SFSS42-inch high-performance island hood
ProfessionalZV36RSF36-inch stainless professional hood
ProfessionalZV36SSJ36-inch low-profile professional hood
ProfessionalZV370YSS30-inch straight-sided halogen hood
ProfessionalZV48SSJ48-inch stainless professional hood
ProfessionalZV670WSS36-inch taper-sided halogen hood
ProfessionalZV671W36-inch taper-sided warming hood
ProfessionalZV680Y36-inch straight-side halogen hoodZV371Y questions
What does the infrared lamp do?
It holds finished dishes warm beneath the hood. Because it has a separate switch, we test it away from the halogen lights.
Why do some lamps light while another stays dark?
Each lamp sits in its own socket, so we test lamps, sockets and switches, and each may need a separate part.