Monogram ZVB30SBSS repair
30-inch stainless telescopic downdraft vent. Service for this model across Tampa Bay.

- Model
- ZVB30SBSS
- Type
- 30-inch stainless telescopic downdraft vent
- Years
- Legacy model
- Brand
- Monogram
About the ZVB30SBSS
Legacy status applies to the ZVB30SBSS, a stainless steel telescopic downdraft vent produced from 1999 to 2021 for 30-inch cooktops. It rises when needed and disappears afterward, sparing the kitchen a tall hood.
We follow the problem in the order a cook would notice it. The riser first: does it climb and sink when told? Then the fan: will it start and shift speeds? Then airflow: filters clean, duct under the counter free of grease? Stainless units also get a look for rubbing where the riser passes the cutout. Production changes over the years are one reason your label guides parts.
What we check on a ZVB30SBSS visit
- Riser response to the control
- Fan start and speed changes
- Rubbing at the cutout and duct condition
Key features
- Stainless downdraft for 30-inch cooktops
- Telescopic rise and drop
- Produced 1999 to 2021
- Out of production
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram hood & ventilation codes
Codes listed for Monogram hood & ventilations. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram hood & ventilation models
Hood & VentilationZV1050SFSS42-inch high-performance island hood
ProfessionalZV36RSF36-inch stainless professional hood
ProfessionalZV36SSJ36-inch low-profile professional hood
ProfessionalZV370YSS30-inch straight-sided halogen hood
ProfessionalZV371Y30-inch hood with infrared warming lamp
ProfessionalZV48SSJ48-inch stainless professional hood
ProfessionalZV670WSS36-inch taper-sided halogen hood
ProfessionalZV671W36-inch taper-sided warming hoodZVB30SBSS questions
Can parts for a ZVB30SBSS still be found?
It varies by part. After reading the label we tell you what we can obtain, how long it takes and what it costs, before any work.
The riser squeaks while moving. Is that serious?
Squeaks usually mean friction at guides or cutout. We clean the travel path and say plainly if a part is worn.