Monogram ZVW1360SP repair
36-inch professional chimney hood, Professional. Service for this model across Tampa Bay.

- Model
- ZVW1360SP
- Type
- 36-inch professional chimney hood
- Series
- Professional
- Years
- Current model
- Brand
- Monogram
About the ZVW1360SP
Backlit glass touch controls and a top vent set the ZVW1360SP apart. It is Monogram’s 36-inch Professional chimney hood, on sale since 2021, mounted on the wall above a 36-inch range, 18 inches high and 22 deep.
First we see whether the panel answers and lights. Each touch zone is tried, then the fan at every speed and the lamps. Air rises straight through the chimney, so a closed damper or crushed duct above cuts pull fast, and we inspect that connection along with filters. Your label tells us which panel or blower to order.
What we check on a ZVW1360SP visit
- Glass panel response and backlight
- Blower speeds and lamps
- Top duct connection and damper
Key features
- Professional chimney hood for 36-inch ranges
- Backlit glass touch
- Top venting
- Variant ZVW1360SPSS
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Haier US Appliance Solutions, Inc..
Monogram hood & ventilation codes
Codes listed for Monogram hood & ventilations. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Monogram hood & ventilation models
Hood & VentilationZV1050SFSS42-inch high-performance island hood
ProfessionalZV36RSF36-inch stainless professional hood
ProfessionalZV36SSJ36-inch low-profile professional hood
ProfessionalZV370YSS30-inch straight-sided halogen hood
ProfessionalZV371Y30-inch hood with infrared warming lamp
ProfessionalZV48SSJ48-inch stainless professional hood
ProfessionalZV670WSS36-inch taper-sided halogen hood
ProfessionalZV671W36-inch taper-sided warming hoodZVW1360SP questions
The backlight is dim yet the fan works. Why?
That suggests the touch panel or its wiring, not the blower itself. We test panel and wiring first.
Why does top venting matter?
The duct above carries all the air, so damper and joints are inspected. A restriction there shows as weak pull and noise.